Evaluation of Stress Intensity Factor and J-Integral for Surface-Cracked Plate
نویسندگان
چکیده
منابع مشابه
Approximate methods for predicting J-integral of a circumferentially surface-cracked pipe subject to bending
This study proposes two new methods to estimate the energy release rate of a circumferentially cracked pipe with an internal, constant-depth, finite-length surface flaw subjected to pure bending loads. The methods are based on the deformation theory of plasticity, constitutive law characterized by Ramberg–Osgood model, and an equivalence criterion incorporating reduced thickness analogy for sim...
متن کاملStress Intensity Factor of Radial Cracks for Rotating Disks and Cylinders using Average Stress Method
This article utilizes the average stress method to obtain the stress intensity factor of rotating solid and hollow disks/cylinders containing a radial crack. It is assumed that the cracks are located radially at center, internal or external radius of the geometry. Results are shown for both of the plane stress and plane strain assumptions and are validated against the known data introduce...
متن کاملStress Intensity Factor Variation along a Semicircular Surface Flaw in a Finite-thickness Plate
-The stress intensity factor variation along a semicircular surface law in a three dimensional solid @late) of finite thickness is derived. This is done using a nested alternating procedure which employs the complete analytical solution for an arbitrarily loaded circular flaw embedded in an infinite solid. The method accounts for both the front-surface/backsurface as well as the boundary-crack ...
متن کاملJ–Q characterized stress fields of surface-cracked metallic liners – II. Composite overwrapped pressure vessels
Article history: Received 27 October 2010 Received in revised form 21 February 2011 Accepted 23 February 2011 Available online 22 April 2011
متن کاملStress intensity factor at the hole-edge cracks tips in a finite plate
In the current research work, the problem of fracture mechanics in a plate with a central hole under tensile loading is studied. The stress intensity factors are calculated for a finite plate containing two symmetrical hole-edge cracks. The problem is solved by two different methods, namely the finite element method and the FRANC software analysis. At first the finite element method is used and...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1982
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.48.1128