Evaluation of temperature changes in the pulp chamber during polymerization of light-cured pulp-capping materials by using a VALO LED light curing unit at different curing distances
نویسندگان
چکیده
منابع مشابه
A study of temperature rise in the pulp chamber during composite polymerization with different light-curing units.
AIM The study compared pulp temperature rise during polymerization of resin-based composites (RBCs) using halogen and LED light-curing units (LCUs). METHODS AND MATERIALS A total of 32 teeth extracted from patients aged 11-18 years were used in the study. Thermocouples placed on the roof of the pulp chamber using a novel 'split-tooth' method. In Group 1 a halogen LCU with a light intensity of...
متن کاملThe cytotoxicity of resin composites cured with three light curing units at different curing distances.
OBJECTIVE The purpose of this study was to compare the effect of light curing distance on the cytotoxicity of five resin composites cured with three high-power light curing units. STUDY DESIGN Seven cylindrical discs of each material (Grandio®, Voco; Filtek™ Z250, 3M ESPE; Clearfil™ AP-X, Kuraray Co. Ltd.; Aelite™ LS, Bisco Inc. and Simile®, Pentron) were cured. For curing, soft-up mode of qu...
متن کاملCuring depth of composite resin light cured by LED and halogen light-curing units
The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37 ° C. The Vickers microhardness ...
متن کاملTemperature excursions at the pulp-dentin junction during the curing of light-activated dental restorations.
OBJECTIVES Excessive heat produced during the curing of light-activated dental restorations may injure the dental pulp. The maximum temperature excursion at the pulp-dentin junction provides a means to assess the risk of thermal injury. In this investigation we develop and evaluate a model to simulate temperature increases during light-curing of dental restorations and use it to investigate the...
متن کاملModern high powered led curing lights and their effect on pulp chamber temperature of bulk and incrementally cured composite resin.
Pulpal temperature changes induced by modern high powered light emitting diodes (LEDs) are of concern when used to cure composite resins. This study showed an increase in pulp chamber temperature with an increase in power density for all light cure units (LCU) when used to bulk cure composite resin. Amongst the three LEDs tested, the Elipar Freelight-2 recorded the highest temperature changes. ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials Journal
سال: 2014
ISSN: 0287-4547,1881-1361
DOI: 10.4012/dmj.2013-274