Evaluation of tensile strength of dissimilar metal pure aluminium and pure copper friction welds
نویسندگان
چکیده
منابع مشابه
Tensile and flexural strength of commercially pure titanium submitted to laser and tungsten inert gas welds.
This study evaluated the tensile and flexural strength of tungsten inert gas (TIG) welds in specimens made of commercially pure titanium (CP Ti) compared with laser welds. Sixty cylindrical specimens (2 mm diameter x 55 mm thick) were randomly assigned to 3 groups for each test (n=10): no welding (control), TIG welding (10 V, 36 A, 8 s) and Nd:YAG laser welding (380 V, 8 ms). The specimens were...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملFriction stir welding of dissimilar joint of aluminum alloy 5083 and commercially pure titanium
In this study, commercially pure titanium and aluminum alloy 5083 in connection rotational speed of 1120 rpm and a feed rate of 50 mm per minute for butt welding by friction stir welding has been successfully completed. Micro-structure, hardness and tensile test was conducted on the connection. Welding area is a composite of aluminum and titanium particles that the particles plays an important ...
متن کاملEffects of Microstructure and Bond Quality on the Ultrasonic Evaluation of Dissimilar Metal Friction Welds
During the last several years we have been investigating ultrasonic techniques for evaluating the quality of solid state weld interfaces [1 ,2]. Promising results have been obtained on a variety of different solid state welds by extracting features from the ultrasonic waveforms and applying pattern recognition algorithms to separate acceptable from unacceptable welds. In general, the primary di...
متن کاملIdeal pure shear strength of aluminum and copper.
Although aluminum has a smaller modulus in [111]<112> shear than that of copper, we find by first-principles calculation that its ideal shear strength is larger because of a more extended deformation range before softening. This fundamental behavior, along with an abnormally high intrinsic stacking fault energy and a different orientation dependence on pressure hardening, are traced to the dire...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Today: Proceedings
سال: 2021
ISSN: 2214-7853
DOI: 10.1016/j.matpr.2020.06.385