Evaluation of the coagulation floatation process for industrial mineral oil wastewater treatment using response surface methodology (rsm)
نویسندگان
چکیده
منابع مشابه
Paper and Cardboard Industries Wastewater Treatment by Coagulation and Flocculation Process and Optimization with Response Surface Methodology: A Laboratory Study
Background and Objectives: Wastewater treatment of paper recycling and cardboard industries with the aim of water recycling and reducing environmental impact is one of the daily needs of industries. Therefore, the aim of the present study was to optimize the conditions of coagulation and flocculation process in wastewater treatment of paper recycling industries using the response surface method...
متن کاملAn Overview of Wastewater Treatment Processes Optimization Using Response Surface Methodology (rsm)
Optimization plays a key role in environmental engineering parameters since the best system performance mainly is on optimum point or optimum range. The majority of wastewater treatment processes are multi-variable and optimization through the classical method is inflexible, unreliable and time-consuming. Thus, response surface methodology (RSM), as a very efficient design and widely used techn...
متن کاملPerformance evaluation of mullite ceramic membrane for oily wastewater treatment using response surface methodology based on Box-Behnken design
Nowadays, oily wastewater is increasing along with the growth of various industries. So, wastewater treatment is necessary in order to protect the environment. In this study, a mullite ceramic membrane was prepared. Then, oily wastewater treatment with 200 mg L-1 concentration was investigated by the response surface methodology based on Box-Behnken design (BBD) using Design-Expert 7...
متن کاملOptimization of Biodiesel Production from Castor Oil Using a Microwave Via Response Surface Methodology (RSM)
The purpose of this research work was to investigate the optimum operating conditions for biodiesel production from castor oil using a microwave. The Box–Behnken design of experiment was carried out using the Design Expert 7. A response surface methodology (RSM) was used to analyze the influence of the process variables (molar ratio of methanol to castor oil, catalyst concentration, reaction ti...
متن کاملstatistical modeling and process optimization of industrial wastewater treatment of mobarekeh steel complex using response surface methodology
in this study, modeling and optimization of coagulation and flocculation processes in cod removal of galvanized wastewater treatment plant of mobarakeh steel complex (msc) were studied. experiments of this study were designed using response surface method which is one of the most efficient methods in experimental design. the variables assessed in this study, are four factors including ph, input...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Environmental Impacts: Management, Mitigation and Recovery
سال: 2018
ISSN: 2398-2640,2398-2640
DOI: 10.2495/ei-v1-n4-491-502