Evaluation Techniques for Corrosion Degradation of Coated Steels
نویسندگان
چکیده
منابع مشابه
Graphene nanocomposite coatings for protecting low-alloy steels from corrosion
facturing methods. Graphene nanocomposite coatings for protecting lowalloy steels from corrosion A ceramic engineer or scientist unfortunately must admit that there is an unwelcome member of the family among us—iron oxide, or rust. This unpleasant family member is disruptive at best. More often it is destructive, nearly impossible to control, and a consumer of resources that are devoted to it i...
متن کاملEvaluation of corrosion behaviour on Mn-Cr austenitic steels using 0.1 M HCl solution
One of the attractive low activation steels is the austenitic Mn-Cr steel from the view point of waste disposal because of few long-lived nuclides. In this paper, three types of Mn-Cr austenitic steels were fabricated by vacuum induction furnace. Then plates with 10 mm thickness were fabricated by hot-rolling. The physical metallurgy of these steels was studied by the corrected Schaeffler diagr...
متن کاملEstimation of Atmospheric Corrosion of High-Strength, Low-Alloy Steels
This data analysis was undertaken to investigate the weatherability of steels whose compositions do not fall in the range of ASTM Standard G101, Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels (1). This standard was developed to estimate the corrosion resistance of low-alloy weathering steels from chemical composition data and from actual atmospheric exposure tests. This sta...
متن کاملPredicted Fracture Behavior of Shaft Steels with Improved Corrosion Resistance
One of the crucial steps in the shaft design process is the optimal selection of the material. Two types of shaft steels with improved corrosion resistances, 1.4305 and 1.7225, were investigated experimentally and numerically in this paper in order to determine some of the material characteristics important for material selection in the engineering design process. Ultimate tensile strength and ...
متن کاملImprovement of Corrosion Resistance of Steels by Surface Modification
The corrosion of metals is a destructive process regarding to the basic modern constructional material with a great importance for the nowadays industry and in many cases represents an enormous economic loss. Therefore, it is not a surprise that the research on the corrosion and corrosion protection of metallic materials is developed on a large scale in different directions and a wide range of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Surface Finishing Society of Japan
سال: 2019
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.70.599