Evaluations of Life Cycle Assessment on Indium-Tin-Oxide Electrochemical Recycling Process
نویسندگان
چکیده
منابع مشابه
Functionalization of indium tin oxide.
The preparation and functionalization of ITO surfaces has been studied using primarily X-ray photoemission spectroscopy and infrared reflection-absorption spectroscopy (IRRAS) and the reagents n-hexylamine and n-octyltrimethoxysilane (OTMS). Particular attention has been paid to characterization of the surfaces both before and after functionalization. Surfaces cleaned by ultraviolet (UV)/ozone ...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملIndium Tin Oxide@Carbon Core–Shell Nanowire and Jagged Indium Tin Oxide Nanowire
This paper reports two new indium tin oxide (ITO)-based nanostructures, namely ITO@carbon core-shell nanowire and jagged ITO nanowire. The ITO@carbon core-shell nanowires (~50 nm in diameter, 1-5 μm in length,) were prepared by a chemical vapor deposition process from commercial ITO nanoparticles. A carbon overlayer (~5-10 in thickness) was observed around ITO nanowire core, which was in situ f...
متن کاملOn the initial growth of indium tin oxide on glass
The initial growth mode of indium tin oxide on glass was studied. An interesting transition from a 3D island growth mode at low temperatures to 2D growth at higher temperature was observed. This transition from the Volmer-Weber mechanism to the Frank–van der Merwe mechanism occurs at about 150°C. It coincides with the transition from amorphous to polycrystalline growth of the thin films. © 1996...
متن کاملMicropatterning of proteins and mammalian cells on indium tin oxide.
This paper describes a novel surface engineering approach that combines oxygen plasma treatment and electrochemical activation to create micropatterned cocultures on indium tin oxide (ITO) substrates. In this approach, photoresist was patterned onto an ITO substrate modified with poly(ethylene) glycol (PEG) silane. The photoresist served as a stencil during exposure of the surface to oxygen pla...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Clean Technology
سال: 2013
ISSN: 1598-9712
DOI: 10.7464/ksct.2013.19.4.388