Evolution and stability of texture during thermomechanical processing of Ti-24Al-11Nb alloy
نویسندگان
چکیده
منابع مشابه
Time-temperature transformation behavior of Ti-24Al- 11Nb
The time-temperature transformation behavior of a rapidly solidified (RS) Ti-24Al-11Nb alloy has been studied between 450 and 850 “C using X-ray diffraction, electron diffraction, transmission electron microscopy and microindentation methods. A revised isothermal transformation path from the initial B2 to the final cz? structure has been proposed: B2 (Pmjm)B19 (Pmma)-0’ (Cmcm) 0’ (Cmcm) a2 (P6,...
متن کاملThe effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملInfluence of shock loading on the structure/property response of Ti-48Al-2Cr-2Nb and Ti-24Al-11Nb
Intermetallics are receiving increasing attention for applications requiring high-leverage materials possessing potentially high pay-offs such as in gas-turbine engines. While the quasistatic deformation response of a broad range of intermetallics is receiving intense scientific and engineering study increased utilization of intermetallics under dynamic loading requires an understanding of thei...
متن کاملRecrystallization texture during ECAP processing of ultrafine/nano grained magnesium alloy
An ultrafine/nano grained AZ31 magnesium alloy was produced through four-pass ECAP processing. TEM microscopy indicated that recrystallized regions included nano grains of 75 nm. Pole figures showed that a fiber basal texture with two-pole peaks was developed after four passes, where a basal pole peak lies parallel to the extrusion direction (ED) and the other ~20° away from the transverse dire...
متن کاملTHE TEXTURE DEVELOPMENT OF Ti - Ni - Cu WIRE DURING THERMOMECHANICAL CYCLING
An investigation has been carried out on the texture of Ti-44Ni-5Cu (at %) shape memory alloy wire. The texture of the B2 and monoclinic phases has been determined as a function of the degree of cold deformation during the drawing process and the number of cycles on thermomechanical cycling. After cold drawing and anlealing (823 K, 180 s ) under tensile stress, the [110], [li~] [loll and [loll ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 1999
ISSN: 0250-4707,0973-7669
DOI: 10.1007/bf02749971