Evolution of global heat transfer coefficient on PCM energy storage cycles
نویسندگان
چکیده
منابع مشابه
Heat Transfer Modelling within Graphite/pcm Composite Materials for High Temperature Energy Storage
Moderately compressed exfoliated graphite (CEG) leads to highly porous graphite “foams” or matrices which have numerous actual and potential applications. The graphite/salt composite materials considered here for high temperature energy storage applications, as due to its superior heat conduction and thermal storage characteristics, are manufactured by uniaxial compression of a mixture of salt ...
متن کاملDetermination of the Heat Storage Capacity of Pcm and Pcm-objects as a Function of Temperature
Phase change materials (PCM) are thermal storage materials with a high storage density for small temperature range applications. One such application is the storage of natural cold of the night to use during daytime, called “free cooling”. Very high energy efficiency can be reached as the cold has not to be generated. Those systems are especially interesting for lightweight buildings, which hea...
متن کاملEffect of nanoparticles on heat capacity of nanofluids based on molten salts as PCM for thermal energy storage
In this study, different nanofluids with phase change behavior were developed by mixing a molten salt base fluid (selected as phase change material) with nanoparticles using the direct-synthesis method. The thermal properties of the nanofluids obtained were investigated. These nanofluids can be used in concentrating solar plants with a reduction of storage material if an improvement in the spec...
متن کاملPrediction of Heat Transfer Coefficient for Thermal Regenerators
Correlation of heat transfer coefficients for air flow through the regenerator constructed from randomly paked spheres is reported for the symmetric-balanced mode of operation. The experimental results have been correlated by the least square regression has been obtained.The present correlation has been compared with the heat transfer coefficient correlations in the literature.
متن کاملPCM storage system with integrated active heat pipe
The use of the latent heat of phase change materials (PCM) is considered a promising approach to store heat at a nearly constant temperature for direct steam generation (DSG), but the poor thermal conductivity of commonly available storage materials imposes severe limitations on storage performance. A new method is proposed to overcome the limitations of the low thermal conductivity. The approa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Energy Procedia
سال: 2017
ISSN: 1876-6102
DOI: 10.1016/j.egypro.2017.10.318