Evolution of Mechanical Property and Microstructure of Fibre-Reinforced Ultra High Strength Mortar with Desert Sand

نویسندگان

چکیده

Previous research showed that the concrete’s strength is obviously decreased when river sand was substituted by desert in abundance. In this paper, a new type of fibre-reinforced ultra high-strength mortar studied. mix design mortar, low W/B used to save water. Also, fly ash and silica fume were adopted partly replace cement, completely take place sand. At same time, steel fibre improve toughness. The pore structure changes different high studied MIP. SEM XRD study microstructure hydration product changes. results are as follows: mortar’s mechanical properties improved content rise. When substitute completely, compressive increased 36.91%, which reached 149.08 MPa. With sand’s addition, porosity decreases its optimized. Desert played an active part promoting increasing products, densifying improving properties..The paper solves problem high-content cannot meet demand, provides actual application theoretical basis.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers

Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...

متن کامل

Improvement of Strength Parameters of Sand Reinforced with Polymeric Fibers

Triaxial consolidated drained, unconfined compression, and CBR tests have been conducted in order to study the stress-strain, strength, and volume change characteristics of fine sand specimens reinforced by polymeric fibers made from carpet wastes. The variables are aspect ratio (length/width) and weight percentage of the fibers. The results indicate that the peak strength and total volume chan...

متن کامل

Mechanical Behavior of Hybrid Fiber Reinforced High Strength Concrete with Graded Fibers

Brittleness, which was the inherent weakness in High Strength Concrete (HSC), can be avoided by reinforcing the concrete with discontinuous fibers. Reinforcing HSC with more than one fiber is advantageous in an overall improvement of the mechanical performance of the composite. In this experimental study, Hybrid Fiber Reinforced High Strength Concrete (HyFR-HSC) mixes were formed by blending si...

متن کامل

ThE EFFECT OF METAKOLIN, MICROSILICA AND NANOSILICA ON THE MECHANICAL PROPERTIES AND MICROSTRUCTURE OF CEMENT MORTAR

Different mineral admixtures of Indian metakaolin, Iranian silica fume and nanosilica were used to produce high performance mortars. Two different sands types with grain size of 0.015-4mm were mixed with type II Portland cement, polycarboxylate superplasticizer,mineral admixture with 650kg/m3 cement content and water/cement ratio of 0.35. Different amount of cement was replaced by metakaolin or...

متن کامل

Mechanical Properties of Hybrid Fibre Reinforced Concrete With Steel And

The experimental study deals with Hybrid fibre reinforced concrete with the use of (Polypropylene and Recycled polyethylene terephthalate RPET). The M40 grade concrete used was designed by using IS10262-2009 code. The steel fibre and synthetic fibre were added at the volume fractions up to 0.5%. Test results showed that the fibres, when used in a hybrid form, could result in superior composite ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Advances in transdisciplinary engineering

سال: 2022

ISSN: ['2352-751X', '2352-7528']

DOI: https://doi.org/10.3233/atde220375