EVOLUTION OF THE MICROSTRUCTURAL PARAMETERS OF COLD WORK Ti-6-Al-4V ALLOY
نویسندگان
چکیده
منابع مشابه
Microstructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملMicrostructural Evaluation of Ti-6AL-4V Alloy during Hot Deformation
Among the titanium alloys, Ti-6Al-4V is the most widely used. In the present work, the uniaxial hot compressive behavior of Ti-6Al-4V has been investigated under constant strain rates. A series of dilatometery experiments were carried out to determine the transformation temperatures at different cooling rates. Specimens were homogenized at 1050 °C for 10 minutes followed by fast cooling to dif...
متن کاملStructural and Textural Evolution during Cold Work in Ti-Rich Ni-Ti Shape Memory Alloy
The properties and cost have made the Nickel-Titanium (NiTi) shape memory alloys (SMA) attractive for a variety of applications wherein shape memory effect (SME) / superelasticity (SE) and biocompatibility are important. Anisotropy of the shape recovery associated with shape memory effect strongly depends on the type of r 30 minutes in air) Ti-Rich Ni-Ti SMA (Ni51at%Ti) when subjected to cold r...
متن کاملEffect of plasma welding parameters on the flexural strength of Ti-6Al-4V alloy.
The aim of this study was to assess the effect of different plasma arc welding parameters on the flexural strength of titanium alloy beams (Ti-6Al-4V). Forty Ti-6Al-4V and 10 NiCr alloy beam specimens (40 mm long and 3.18 mm diameter) were prepared and divided into 5 groups (n=10). The titanium alloy beams for the control group were not sectioned or subjected to welding. Groups PL10, PL12, and ...
متن کاملOptimizing the EDM Parameters to Improve the Surface Roughness of Titanium Alloy (Ti-6AL-4V)
The purpose of this paper is to optimize the EDM parameters to get the better surface finish on the Titanium alloys Ti6AL4V. The continuous advancement of the alloy is fulfilling the demand of the industry but for advance material like Titanium alloys Ti6AL4V partially adopted by industries cause of the difficulties in machining. Non Conventional machining process like Spark Erosion Electrical ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Metallurgica Slovaca
سال: 2017
ISSN: 1338-1156,1335-1532
DOI: 10.12776/ams.v23i4.1003