Excimer laser cleaning of black sulphur encrustation from silver surface
نویسندگان
چکیده
منابع مشابه
Surface Modification of TIMETAL 834 by Excimer Pulse Laser
Ti alloys become very popular in various engineering fields due to its light weight, high strength and good corrosion resistance properties. Nevertheless, its application is limited in many areas like: tribology, high temperature oxidation and aggressive corrosion fields due to its poor surface properties. Therefore, the proper surface treatment is required to increase the usageof Ti alloys in ...
متن کاملSurface acceleration during dry laser cleaning of silicon
We report on measurements of the surface acceleration for the application of dry laser cleaning. For that purpose, industrial silicon samples were irradiated by a frequency-doubled Q-switched Nd:YAG laser. The surface displacement was measured by a heterodyne interferometer and recorded by a digital storage oscilloscope. Several hundreds of shots were averaged to give smooth displacement curves...
متن کاملBlack silicon with self-cleaning surface prepared by wetting processes
This paper reports on a simple method to prepare a hydrophobic surface on black silicon, which is fabricated by metal-assisted wet etching. To increase the reaction rate, the reaction device was placed in a heat collection-constant temperature type magnetic stirrer and set at room temperature. It was demonstrated that the micro- and nanoscale spikes on the black silicon made the surface become ...
متن کاملThe Excimer Laser
By Maria Clara Arbelaez, MD; and Thomas Magnago, Dipl-Ing Due to recent advances in refractive surgery, the complexities of correcting irregular astigmatism can now receive closer attention than ever before. Today, subjective evaluation of the patient’s refractive deficit may not produce an accurate depiction of his preexisting astigmatism. To minimize poor postoperative results, the golden rul...
متن کاملExcimer laser trabeculotomy.
ous fluid by producing 0.5-mm holes. There is no reference given to this observation, therefore it is not clear how this observation was determined. The article states that the laser fiber is 200 m. It is unclear how this would create 500m ostia. On page 286, an aiming beam is mentioned in the Surgical Technique section. However, unless the AIDA laser system has been modified, and this is not...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics & Laser Technology
سال: 2019
ISSN: 0030-3992
DOI: 10.1016/j.optlastec.2018.12.012