Exergy Analysis on the Ceramic Manufacturing Process
نویسندگان
چکیده
منابع مشابه
A Novel Extrusion-based Additive Manufacturing Process for Ceramic Parts
An extrusion-based additive manufacturing process, called the Ceramic On-Demand Extrusion (CODE) process, for producing three-dimensional ceramic components with near theoretical density is introduced in this paper. In this process, an aqueous paste of ceramic particles with a very low binder content (<1 vol%) is extruded through a moving nozzle at room temperature. After a layer is deposited, ...
متن کاملExergy Analysis of Overspray Process in Gas Turbine Systems
Gas turbine power can be augmented by overspray process which consists of inlet fogging and wet compression. In this study exergy analysis of the overspray process in gas turbine system is carried out with a non-equilibrium analytical modeling based on droplet evaporation and the second law of thermodynamics. This work focuses on the effects of system parameters such as pressure ratio, water in...
متن کاملExergy Analysis of the Optimized MSFD Type of Brackish Water Desalination Process
This paper presents a detailed thermodynamical exergy analysis of an optimized MSF distillation plant based on the latest published thermodynamics properties of water and seawater software of the Massachusetts Institute of Technology by using design and optimized plant operation data. Exergy flow rates are evaluated throughout the plant and the exergy flow diagram is prepared in both cases....
متن کاملExergy and Energy Analysis of Effective Utilization of Carbon Dioxide in the Gas-to-Methanol Process
Two process models are used to convert carbon dioxide into methanol. These processes have been extended and improved using Aspen Plus simulator software. Both processes are found in the CO2 correction system. In this machine, the desired synthesis gas is produced in a flexible configuration. At the same time, the conversion of CO2 to hydrogen via a copper-based catalyst ha...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2007
ISSN: 1882-0743,1348-6535
DOI: 10.2109/jcersj2.115.987