Exothermic Reaction of Cu-Al Comacts during Sintering
نویسندگان
چکیده
منابع مشابه
Density fingering of an exothermic autocatalytic reaction.
Density fingering of exothermic autocatalytic fronts in vertically oriented porous media and Hele-Shaw cells is studied theoretically for chemical reactions where the solutal and thermal contribution to density changes have opposite signs. The competition between these two effects leads to thermal plumes for ascending fronts. The descending fronts behave strikingly differently as they can featu...
متن کاملEFFECT OF SUPERSOLIDUS LIQUID PHASE SINTERING ON THE MICROSTRUCTURE AND DENSIFICATION OF THE Al-Cu-Mg PREALLOYED POWDER
Abstract: The supersolidus liquid phase sintering characteristics of commercial 2024 pre-alloyed powder was studied at different sintering conditions. Pre-alloyed 2024 aluminum alloy powder was produced via air atomizing process with particle size of less than 100 µm. The solidus and liquidus temperatures of the produced alloy were determined using differential thermal analysis (DTA). The sinte...
متن کاملExothermic reactions in cold rolled Ni/Al reactive multilayer foils
Self-propagating exothermic formation reactions have been intensively studied in a variety of reactive multilayer foils, such as Ni/Al, Ni/Si, and Nb/Si foils. These foils contain numerous alternating nanoscale layers of elements with large negative heats of mixing. With a small thermal pulse, atoms diffuse normal to the layering and result in a rapid exothermic reaction. The heat produced is c...
متن کاملLow-dose laser sintering of Cu nanoparticles on the ceramic substrate during ink-jet interconnection
The deposition of nano-size copper particles was carried out by means of ink-jet printing on the ceramic substrate (silicon and faience) using Nd +3 :YAG laser. Glycerin and aqueous based nano copper inks were prepared and were inkjetted in this study. The sintered copper film had a grainy structure with neck-like junctions. The microstructure and soldering properties were examined using XRD, S...
متن کاملInterfacial Reaction and IMC Growth of an Ultrasonically Soldered Cu/SAC305/Cu Structure during Isothermal Aging
In order to accelerate the growth of interfacial intermetallic compound (IMC) layers in a soldering structure, Cu/SAC305/Cu was first ultrasonically spot soldered and then subjected to isothermal aging. Relatively short vibration times, i.e., 400 ms and 800 ms, were used for the ultrasonic soldering. The isothermal aging was conducted at 150 °C for 0, 120, 240, and 360 h. The evolution of micro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Powder and Powder Metallurgy
سال: 1965
ISSN: 0532-8799,1880-9014
DOI: 10.2497/jjspm.12.152