Experimental and numerical investigation of a cracked transversely graded plate subjected to in plane bending
نویسندگان
چکیده
منابع مشابه
EXPERIMENTAL AND NUMERICAL INVESTIGATION ON LASER BENDING PROCESS
Laser bending is an advanced process in sheet metal forming in which a laser heat source is used to shape the metal sheet. In this paper, temperature distribution in a mild steel sheet metal is investigated numerically and experimentally. Laser heat source is applied through curved paths in square sheet metal parts. Finite element (FE) simulation is performed with the ABAQUS/CAE standard softwa...
متن کاملNumerical and experimental investigation of laser induced tube bending
Mechanisms of the process are examined to better understand the deformation characteristics such as slightly protruded shape at the intrados, wall thickness variation, cross-section ovalization, bending radius, and asymmetry. A finite element model is developed and validated by experimental observations. Factors important to characteristics of deformation are experimentally and numerically inve...
متن کاملAttractor Based Analysis of Centrally Cracked Plate Subjected to Chaotic Excitation
The presence of part-through cracks with limited length is one of the prevalent defects in the plate structures. Due to the slight effect of this type of damages on the frequency response of the plates, conventional vibration-based damage assessment could be a challenging task. In this study for the first time, a recently developed state-space method which is based on the chaotic excitation is ...
متن کاملAnalyzing Plane-plate Bending with EFGM
The moving least-square technique is used to construct shape function in the Element Free Galerkin Method at present, but sometimes the algebra equations system obtained from the moving least-square approximation is ill-conditioned and the shape function needs large quantity of inverse operation. In this paper, the weighted orthogonal functions are used as basis ones, the application in the cal...
متن کاملStress Concentration Factors in Uniplanar Tubular KT-Joints of Jacket Structures Subjected to In-Plane Bending Loads
In the present research, data extracted from the stress analysis of 46 finite element models, verified using test results obtained from an experimental investigation, were used to study the effect of geometrical parameters on the chord-side stress concentration factors (SCFs) of central and outer braces in uniplanar tubular KT-joints of offshore structures subjected to four different types of i...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2009
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2009.01.026