Experimental and Numerical Investigation of Forming Limit Differences in Biaxial and Dome Test
نویسندگان
چکیده
منابع مشابه
An Experimental and Numerical Study of Forming Limit Diagram of Low Carbon Steel Sheets
The forming limit diagram (FLD) is probably the most common representation of sheet metal formability and can be defined as the locus of the principal planar strains where failure is most likely to occur. Low carbon steel sheets have many applications in industries, especially in automotive parts, therefore it is necessary to study the formability of these steel sheets. In this paper, FLDs, wer...
متن کاملexperimental and numerical investigation of forming limit diagram of 6061 aluminum sheet
because of high strength to weight ratio, 6061 aluminum has many applications in different industries like automotive and aerospace industries and can help to reduction of fuel consumption. forming limit diagram (fld) is a useful method for sheet metal formability identification. whereas calculation of forming limit diagram by experimental tests is expensive and time consumption, in the present...
متن کاملnumerical and experimental evaluation of forming limit in hydrodynamic forming process for spherical end samples
0
متن کاملinvestigation of forming limit and weld line movement in the forming of tailor welded blanks using experiment and numerical methods
the forming limit diagram (fld) is a useful method for characterizing the formability of sheet metals. in this paper, different numerical models were used to investigate the fld of tailor welded blank (twb). twbs were co2 laser-welded samples of interstitial-free (if) steel sheets with different thicknesses. the results of the numerical models were compared with the experimental fld as well as ...
متن کاملNUMERICAL AND EXPERIMENTAL INVESTIGATION OF WIND PRESSURE COEFFICIENTS ON SCALLOP DOME
The wind loads considerably influence lightweight spatial structures. An example of spatial structures is scallop domes that contain various configurations and forms and the wind impact on a scallop dome is more complex due to its additional curvature. In our work, the wind pressure coefficient (Cp ) on the scallop dome surface is studied numerically and experimentally. Firstly, the programming...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Manufacturing Science and Engineering
سال: 2018
ISSN: 1087-1357,1528-8935
DOI: 10.1115/1.4039587