Experimental and numerical investigation of the deformation behaviour of cables and thin beam-like structures under multi-axial loading
نویسندگان
چکیده
In various applications, it is common to use thin beam-like structures, made of plastic or fibre-reinforced materials, as well components such cables. They are flexible, and the most form deformation bending, but they can also be stretched torqued. Due their structural composition, a coupling between different loading directions exists. This especially pronounced for cables, where interact with each other kinematics component different. Thus, characterise these necessary consider tension, torsion, three load cases. this work, characterisations performed polyvinyl chloride rod, carbon coaxial cable. The materials represent isotropic anisotropic material classes include homogeneous non-homogeneous cross-sections. An elasto-plastic model implemented in finite element method behaviour structures. includes plasticity so that effects modelled large deformations. Thin structures discretised higher-order elements, comparison experimental simulation results presented.
منابع مشابه
the investigation of the relationship between type a and type b personalities and quality of translation
چکیده ندارد.
Numerical and Experimental Study on Ratcheting Behavior of Plates with Circular Cutouts under Cyclic Axial Loading
In this paper, accumulation of plastic deformation of AISI 1045 steel plates with circular cutouts under cyclic axial loading is studied. Loading was applied under force-control conditions. Experimental tests were performed using a Zwick/Roell servo hydraulic machine. Under force-control loading with nonzero mean force, plastic strain was accumulated in continuous cycles called ratcheting. Nume...
متن کاملExperimental and Numerical Investigation of Lateral Loading of Thin –Walled Tube with Different Indenter
Impact is one of very important subjects which always have been considered in mechanical science. Nature of impact is such that which makes its control a hard task. Therefore it is required to present the transfer of impact to other vulnerable part of a structure, when it is necessary, one of the best method of absorbing energy of impact, is by using Thin-walled tubes these tubes collapses unde...
متن کاملinvestigation of single-user and multi-user detection methods in mc-cdma systems and comparison of their performances
در این پایان نامه به بررسی روش های آشکارسازی در سیستم های mc-cdma می پردازیم. با توجه به ماهیت آشکارسازی در این سیستم ها، تکنیک های آشکارسازی را می توان به دو دسته ی اصلی تقسیم نمود: آشکارسازی سیگنال ارسالی یک کاربر مطلوب بدون در نظر گرفتن اطلاعاتی در مورد سایر کاربران تداخل کننده که از آن ها به عنوان آشکارساز های تک کاربره یاد می شود و همچنین آشکارسازی سیگنال ارسالی همه ی کاربران فعال موجود در...
Experimental and Numerical Studies on the Characteristics of Simple and Multi-cell Shapes of Quasi-hemisphere Thin-walled Structures
Thin-walled energy absorbers are used to reduce accident induced damages. In this study, thin-walled stainless steel structures in quasi-hemisphere geometry were subjected under quasi-static loading with Santam 150KN apparatus. Experimental results were compared with results of numerical simulations by LS-DYNA and it was shown that there is a good agreement between experimental and numerical r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematics and Mechanics of Solids
سال: 2022
ISSN: ['1741-3028', '1081-2865']
DOI: https://doi.org/10.1177/10812865221114299