Experimental and numerical modeling of flatness defects in strip cold rolling
نویسندگان
چکیده
منابع مشابه
Investigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication
In this paper an analytical model for cold rolling of strip has been described. This model is developed based on the slab method of analysis and the hydrodynamic lubrication. The characteristics of rolling are obtained from the equations of equilibrium and the plate was allowed to strain harden assuming that the lubricant behaves as a Newtonian fluid. The shear stress to the plate is obtained b...
متن کاملInvestigations on Cold Rolling of Strip in Attendance of Hydrodynamic Lubrication
In this paper an analytical model for cold rolling of strip has been described. This model is developed based on the slab method of analysis and the hydrodynamic lubrication. The characteristics of rolling are obtained from the equations of equilibrium and the plate was allowed to strain harden assuming that the lubricant behaves as a Newtonian fluid. The shear stress to the plate is obtained b...
متن کاملModeling of thin strip profile during cold rolling on roll crossing and shifting mill
Strip profile control in cold rolling of thin strip is a difficult and challenge problem found in industry. Currently using the novel type of strip rolling mill, such as the work roll crossing and shifting is the one of the main methods to control the strip profile quality in cold rolling. In this paper, 3-D finite element simulation models of the thin strip profile in cold rolling for the work...
متن کاملa new rolling pressure model for an actual reversing cold rolling strip mill
the forging model for cold rolling is one of rolling models that is used in rolling calculations. in this model,the final rolling pressure is an average value and it is not an accurate model.also by using this model,the firction hill curves are plotted due to the central point of the rolling bite length while frictional stresses intersect at the neutral point.in this study, a new model based on...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Solids and Structures
سال: 2015
ISSN: 0020-7683
DOI: 10.1016/j.ijsolstr.2015.05.017