Experimental and Numerical Seismic Evaluation of RC Walls Under Axial Compression
نویسندگان
چکیده
منابع مشابه
Seismic Behavior of the Partially Prefabricated Laminated RC Walls Under Different Axial Ratios
The partially prefabricated laminated (RC) walls mentioned is this kind of seismic prevention element with part prefabricated concrete plate and cast in place concrete plate. 4 typical laminated walls without openings, 4 laminated walls with openings, and 1 common cast-in-place RC walls were tested under cyclic test. The seismic behaviour were analysed by the finite element software based on th...
متن کاملA numerical and experimental study on buckling and post-buckling of cracked plates under axial compression load
Existence of cracks in industrial structures is one of the important causes of their failure, especially when they are subjected to important axial compressive forces that might lead to buckling. Therefore, it must be considered in stress analysis and designing and loading of such structures. In this paper, the buckling and post-buckling behaviors of stainless-steel cracked plates under axial c...
متن کاملExperimental Study on Axial Compression Behavior of RC Columns Under Rapid Loadings
In this study, experimental study on six RC columns with different slenderness ratios under axial rapid loading was conducted to investigate the axial compression behaviour of RC columns considering the effect of strain rates. The failure pattern of the specimens and the relations of axial loading versus the axial deformation were described. From the test results, the specimens under static and...
متن کاملSeismic behaviour and analysis of U-shaped RC walls
In many countries of moderate to high seismicity, reinforced concrete (RC) core walls are used as lateral bracing systems in midto high-rise buildings where they typically accommodate lift shafts or stair cases. Unlike planar walls which provide horizontal strength and stiffness mainly in the in-plane direction of the wall, core walls provide bidirectional strength and stiffness. This feature c...
متن کاملExperimental and numerical crashworthiness investigation of hybrid composite aluminum tubes under dynamic axial and oblique loadings
This research deals with axial and oblique impact crash tests on simple and hybrid composite tubes. Axial and oblique impact tests have been generated on simple and hybrid composite tubes with one, two and three layers. A drop test rig was used to conduct the experiments. Furthermore, in order to gain more detailed knowledge about the crash process, finite element simulations of the experim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Periodica Polytechnica Civil Engineering
سال: 2020
ISSN: 1587-3773,0553-6626
DOI: 10.3311/ppci.14333