Experimental behaviour of end-plate beam-to-column composite joints under monotonical loading
نویسندگان
چکیده
منابع مشابه
Analytical and Experimental Investigation of I Beam-to-CFT Column Connections under Monotonic Loading (RESEARCH NOTE)
In this study, the behavior characteristics of I beam-to-concrete filled tube (CFT) column connection is studied through experiment and finite element models under the monotonic loading. To validate the finite element modeling, at first, an experimental model is made and experimented. After validation of the finite element modeling, different models were created in the software. The studied par...
متن کاملBehaviour of anisotropic conductive joints under mechanical loading
Anisotropic conductive films (ACFs) received a great deal of attention in recent years for interconnection applications in electronic packaging. This paper reports the behaviour of ACF joints under various mechanical loading, i.e., die shear and cyclic fatigue in shear. The mechanical behaviour of ACF joints that have been exposed to environmental effects, i.e., high moisture and elevated tempe...
متن کاملDamage Evolution in Composite Bonded Joints under Fatigue Loading
The fatigue behaviour of single lap bonded joints under fatigue loading was already investigated and a suitable life prediction model was presented and validated [1-2]. The model is based on the actual damage evolution under fatigue load: a crack initiation followed by its propagation up to a critical length [2, 3]. In the present paper the evolution of fatigue damage in single lap joints is ex...
متن کاملR/C Existing Structures with Smooth Reinforcing Bars: Experimental Behaviour of Beam-Column Joints Subject to Cyclic Lateral Loads
Abstract: The paper illustrates the results of experimental tests performed on sub-assemblages of R/C (Reinforced Concrete) existing structures, designed only for gravity loads In order to estimate failure mechanisms and ductility properties, four internal and external R/C beam-column joints were built and tested. The specimens were built by using concrete with low strength and smooth reinforci...
متن کاملFailure Procedure in Adhesive Composite Joints under Different Types of Loading
In this paper, we have used numerical simulation to study failure of adhesive joints in composite plates. To determine the failure load, adhesive joints are subjected to different types of loading and gradual failure of the joint is studied using the finite element method. The composite material failure theory is implemented into the FEM software. Also different geometries for the joint edge ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Engineering Structures
سال: 2001
ISSN: 0141-0296
DOI: 10.1016/s0141-0296(01)00054-2