Experimental bending tests of partially encased beams at elevated temperatures
نویسندگان
چکیده
منابع مشابه
THE DEFORMATION BEHAVIOR OF AZ31 MAGNESIUM ALLOY AT ELEVATED TEMPERATURES
AZ31 magnesium alloy is considered as a promising alloy in various applications and industries. Furthermore, to design a proper hot working process (rolling, forging and extrusion), the assessment of hot working behaviour of the alloy is necessary. Accordingly, the hot deformation behaviour of AZ31 alloy was studied through hot compression testing method This was carried out in a wide range of ...
متن کاملExperimental investigation of octagonal partially encased composite columns subject to concentric and eccentric loading
Partially Encased Composite (PEC) column is one of the recent achievements in the field of composite columns. This paper presents a combined experimental and theoretical study on the mechanical performances of six octagonal PEC columns subjected to axial compressive and bending moment loading. The major different between them was the concrete reinforcement details. The parameters studied in the...
متن کاملStability of Partially Hydrolyzed Polyacrylamides at Elevated Temperatures in the Absence of Divalent Cations
At elevated temperatures in aqueous solution, partially hydrolyzed polyacrylamides (HPAM) experience hydrolysis of amide side groups. However, in the absence of dissolved oxygen and divalent cations, the polymer backbone can remain stable so that HPAM solutions were projected to maintain at least half their original viscosity for over 8 years at 100°C and about 2 years at 120°C. Within our expe...
متن کاملHydrodynamics of a Gas-Solid Fluidized Bed at Elevated Temperatures Using the Radioactive Particle Tracking Technique
Effect of temperature on hydrodynamics of bubbling gas-solid fluidized beds was investigated. Experiments were carried out in the range of 25-600 ºC and different superficial gas velocities in the range of 0.17-0.78 m/s with sand particles. Time-position trajectory of particles was obtained by radioactive particle tracking technique. These data were used for determination of mean velocitie...
متن کاملMicrostructural Evolution of Roll Bonded Al-Clad Stainless Steel Sheets at Elevated Temperatures
The cold roll bonding of Al on AISI 304L stainless steel was carried out to fabricate the Al/304L/Al clad sheet composites. The maximum bond strength of 20 N/mm was acquired just by 38% reduction, for which the tearing of the aluminum sheet occurred during the peeling test. The microstructural evolution during subsequent postannealing heat treatment was systematically studied based on the impur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Fire Safety Journal
سال: 2017
ISSN: 0379-7112
DOI: 10.1016/j.firesaf.2017.05.014