Experimental Binder-free Investments Reused to Cast Dental Precious Alloys
نویسندگان
چکیده
منابع مشابه
Laser Welding of Titanium and Dental Precious Alloys
The performance of laser welding of Ti and two dental precious alloys (Ag-Pd-Au, Au-Pt-Ag) was investigated by mechanical testing and microscopic observation, using butt joint as design. The laser irradiation was done using a commercial Nd:YAG dental laser-welding device in a single pulse mode with output currents 150, 200, 250, 300A, spot diameters 0.6, 0.9, 1.2mm, and pulse duration 10ms. The...
متن کاملDeffects in Dental Alloys Cast Single Tooth Restorations
Casting failures of alloys in dental technology should be the exception, not the rule. They have to be detected in time and associated with possible causes. For the experimental part base metal alloys single tooth restorations were achieved using the conventional lost wax process for casting in order to be evaluated. Some casting defects obtained during the experimental part are exemplified: in...
متن کاملMechanical properties and grindability of dental cast Ti-Nb alloys.
Aiming at developing a dental titanium alloy with better mechanical properties and machinability than unalloyed titanium, a series of Ti-Nb alloys with Nb concentrations up to 30% was made. They were cast into magnesia-based molds using a dental casting machine and the mechanical properties and grindability of the castings were examined. The hardness of the alloys with Nb concentrations of 5% a...
متن کاملAdhesion of adhesive resin to dental precious metal alloys. Part I. New precious metal alloys with base metals for resin bonding.
New dental precious metal alloys for resin bonding without alloy surface modification were developed by adding base metals (In, Zn, or Sn). Before this, binary alloys of Au, Ag, Cu, or Pd containing In, Zn, or Sn were studied for water durability and bonding strength with 4-META resin. The adhesion ability of the binary alloys was improved by adding In equivalent to 15% of Au content, Zn equiva...
متن کاملTarnish resistance evaluation of experimental Pd-free Ag-Au-Pt-Cu dental alloys.
This study evaluated the tarnish resistance of eight experimental Pd-free Ag-Au-Pt-Cu dental alloys in a 0.1% Na(2)S aqueous solution at 37 degrees C. Color measurements of the plate samples were made using a computerized spectrophotometer before and after immersion in the test solution for up to 72 hours. Tarnish discoloration was evaluated using the color difference vector, DeltaE*, in the CI...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Dental Materials Journal
سال: 2006
ISSN: 1881-1361,0287-4547
DOI: 10.4012/dmj.25.553