Experimental data on the adsorption of Reactive Red 198 from aqueous solution using Fe3O4 nanoparticles: Optimization by response surface methodology with central composite design
نویسندگان
چکیده
منابع مشابه
Adsorption Rate of 198 Reactive Red Dye from Aqueous Solutions by using Activated Red Mud
Backgroud and purpose: Dye is one of the problems of industrial effluent such as textile industries. The dyes can be removed by various methods. Therefore, the aim of this study was the evaluation of adsorption rate of reactive red 198 from aqueous solution by activated red mud. Materials and methods: This research was a lab study. Activated red mud was used as an adsorbent to remove reactive r...
متن کاملBentazon removal from aqueous solution by reverse osmosis; optimization of effective parameters using response surface methodology
Although bentazon is widely used as an agricultural herbicide, it is harmful to humans and poses many environmental threats. This study focused on the treatment of wastewater contaminated with bentazon pesticides using membrane technology. In this regard, low-pressure reverse osmosis (RO) was employed as it has already been used in the removal of other micro-pollutants. The effects of process v...
متن کاملResponse Surface Methodology Optimization of Cobalt (II) and Lead (II) Removal from Aqueous Solution Using MWCNT-Fe3O4 Nanocomposite
The present investigation describes the evaluation of feasibility of MWCNT-Fe3O4 nanocomposite toward adsorptive removal of Co(II) and Pb(II) from aqueous solution in batch mode. The Fe3O4–MWCNT hybrid was prepared using a simple one-pot strategy via in situ growth of Fe3O4 magnetic nanoparticles onto the surface of the MWCNT...
متن کاملApplication of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...
متن کاملInvestigation of affecting operational parameters in photocatalytic degradation of reactive red 198 with TiO2: optimization through response surface methodology
Dye-containing wastewater generated from textile industries is a major source of environmental pollution. Azo dyes, which are the largest group of coloring agents, are widely used in industries.This research investigated the photocatalytic decolorization and degradation of an azo dye Reactive Red 198 (RR198) in aqueous solution with TiO2-P25 (Degussa) as photocatalyst in slurry form using UV li...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Data in Brief
سال: 2018
ISSN: 2352-3409
DOI: 10.1016/j.dib.2018.07.008