Experimental Equipment for Damping Capacity Analyze of High or Low Internal Friction Metallic Materials
نویسندگان
چکیده
منابع مشابه
Damping Behavior of the Phenolic Based Composite Friction Materials Containing Thermoplastic Elastomers (TPEs)
Attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (TPE) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. In order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic m...
متن کاملPlastic Behavior of Metallic Damping Materials under Cyclical Shear Loading
Metallic shear panel dampers (SPDs) have been widely adopted in seismic engineering. In this study, axial and torsional specimens of four types of metallic damping materials, including three conventional metallic steels as well as low yield strength steel 160 (LYS160), were tested in order to investigate the material response under repeated large plastic strain and low cycle fatigue between 10 ...
متن کاملAmplitude-Dependent Internal Friction and Microplasticity in Thin-Film Materials
Internal friction in aluminum thin films on silicon substrates has been measured uaween 180 and 360 K as a function of strain amplitude. The amplitude dependence of internal fnction in the aluminum films has been evaluated from the data on the film-substrate composite and further converted into the plastic strain of the order of as a function of the effective stress on dislocation motion. The m...
متن کاملHigh Damping Capacity Coatings for Surface Vibration Control
The damping capacity Q-'of a number of Fe-16%Cr alloys containing (0 6)%A1 and (0 4)%Mo has been investigated and compared to that of thermally sprayed coatings. The magnetomechanical hysteresis loss was determined using a cantilever method and based on the modal analysis technique of flat beam samples. Heat treatments usually enhanced the loss capability, but further annealing destroyed it dra...
متن کاملdamping behavior of the phenolic based composite friction materials containing thermoplastic elastomers (tpes)
attempts have been made for the first time to produce a friction material with thermal sensitive modulus by the inclusion of combined plastic/rubber properties of thermoplastic elastomers (tpe) as viscoelastic polymeric materials into the formulation for the purpose of increasing the damping behavior. in order to evaluate the viscoelastic parameters such as loss factor (tan δ) and elastic modul...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IOP Conference Series: Materials Science and Engineering
سال: 2017
ISSN: 1757-8981,1757-899X
DOI: 10.1088/1757-899x/209/1/012047