Experimental Investigation of Contamination Removal from Slider Bar Surface by Using Various Cleaning Methods
نویسندگان
چکیده
منابع مشابه
an investigation into translation of cultural concepts by beginner and advance student using think – aloud protocols
this research aims at answering the questions about translation problems and strategies applied by translators when translating cultural concepts. in order to address this issue, qualitative and quantitative study were conducted on two groups of subjects at imam reza international university of mashhad. these two groups were assigned as beginner and advanced translation students (10 students). ...
investigation of mercaptan removal from Kerosene using passive mixing tools: Experimental study and CFD modeling
Abstract In this work, the role of appropriate mixing for mercaptan removal from Kerosene using caustic soda has been investigated in the pilot scale. Static mixer at different condition has been used as a passive mixing tool to achieve proper mixing and consequently high performance of mercaptan removal. Two lengths of static mixer including 20 and 40 cm as well as two pitches 1 and 3 m...
متن کاملInvestigation of Ionic Contamination Removal from Silicon Dioxide Surfaces
T he removal of ionic contaminants from silicon surfaces surface contamination level can be reduced by more than one order of magnitude through the use of (wafers) during wet cleaning by pulsating flow is pulsating flow within a short cleaning time. SE/S228 investigated using numerical physical modelling and verified experimentally. T wo KCl removal processes, Dr L in is with IBM Microelectroni...
متن کاملAsh and sulphur removal from bitumen using column flotation technique: Experimental and response surface methodology modeling
This study investigates removing ash and pyrite sulphur from bitumen by column flotation process. Central composite design (CCD) of response surface methodology (RSM) was applied for modeling and optimization of the percentage of ash and pyrite sulphur removal from bitumen. The effects of five parameters namely the amounts of collector and frother agents, particle size, wash water rate and feed...
متن کاملStudying of various nanolithography methods by using Scanning Probe Microscope
The Scanning Probe Microscopes (SPMs) based lithographic techniques have been demonstrated as an extremely capable patterning tool. Manipulating surfaces, creating atomic assembly, fabricating chemical patterns, imaging topography and characterizing various mechanical properties of materials in nanometer regime are enabled by this technique. In this paper, a qualified overview of diverse lithog...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: APCBEE Procedia
سال: 2012
ISSN: 2212-6708
DOI: 10.1016/j.apcbee.2012.06.072