Experimental Investigation on Material Removal Rate, Surface Roughness of Stainless Steel 306 by EDM
نویسندگان
چکیده
منابع مشابه
Analysis of Surface Roughness and Material Removal Rate in Dry and Cryogenic Machining of En31 Steel
Production rates play important role in the turnover of any industry. In order to increase the production rates, industrial processes are need to be speedup by speeding input parameters such as cutting speeds, feed rates etc. But with the higher speeds and feeds the heat generation also increases between tool-chip, tool and work piece interfaces, which reduce the tool life, product quality and ...
متن کاملAn Experimental Study of Surface Roughness of H11 Steel in Edm Process Using Copper Tool Electrode
In this study, the effect of input parameters of Electro Discharge Machining (EDM) process including polarity, peak current, pulse on time, duty cycle, gap voltage and concentration of abrasives powder in dielectric fluid on surface roughness are experimentally investigated. A L18 Taguchi’s standard orthogonal array is used for experimental design. Copper is used as tool electrode to machine H1...
متن کاملEffect of Cutting Parameters on Tool Wear, Surface Roughness and Material Removal Rate During Dry Turning of EN-31 Steel
ISBN 978-93-82338-21-5 | © 2012 Bonfring Abstract--The present paper is an experimental study to investigate the effect of cutting parameters (cutting speed, depth of cut and feed) on tool wear, surface roughness and material removal rate (MRR) during dry turning of EN-31 steel. Turning experiments were conducted with cutting speeds: 250, 300, 350 m/min, feeds: 0.15, 0.2, 0.25 mm/rev and depth ...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملStudy of microEDM parameters of Stainless Steel 316L: Material Removal Rate Optimization using Genetic Algorithm
Suresh P, Venkatesan R, Sekar T, Sathiyamoorthy V # Professor, Department of Mechanical Engineering, Sona College of Technology, Salem, Tamil Nadu, India [email protected] [email protected] Associate Professor Department of Mechanical Engineering, Government College of Engineering, Salem, Tamil Nadu, India [email protected] Asst. Professor Department of Mechanical Engineering, Mahendra E...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal for Research in Applied Science and Engineering Technology
سال: 2020
ISSN: 2321-9653
DOI: 10.22214/ijraset.2020.32600