Experimental investigations on the failure modes of ring-stiffened cylinders under external hydrostatic pressure
نویسندگان
چکیده
منابع مشابه
Experimental Testing of Composite Rings under Uniform External Hydrostatic Pressure
The results obtained from the experimental testing of hoop wound S-2 GlasdEpoxy and AS41 PPS composite rings are presented here. In this study, the effects of different material system and thickness on failure are investigated. A custom, volume controlled pressurization set-up was designed and built for the tests. Initial imperfection in the ring specimens were measured prior to testing and the...
متن کاملComputer aided reliability based design of ring-stiffened cylindrical shells under external pressure
A Level I code format is proposed for the buckling design of ring-stiffened cylindrical shells under external pressure. Depth independent partial safety factors to be applied to the resistance (collapse pressures), are proposed for the four relevant collapse modes Unterframe Shell Collapse, Frame Yield, Plate Yield and Frame Tripping), covering design and fabrication factors. A partial safety f...
متن کاملParametric study of nonlinear buckling capacity of short cylinders with Hemispherical heads under hydrostatic pressure
This study investigates the buckling behavior of short cylindrical shells with hemi-spherical heads subjected to hydrostatic pressure. It is assumed that the length of the cylindrical part is smaller than or equal to its diameter while its material may be dif-ferent from that of hemispherical heads. Finite element analysis was used to seek out the effect of geometric parameters such as thicknes...
متن کاملBuckling Analysis of Functionally Graded Shallow Spherical Shells Under External Hydrostatic Pressure
The aim of this paper is to determine the critical buckling load for simply supported thin shallow spherical shells made of functionally graded material (FGM) subjected to uniform external pressure. A metal-ceramic functionally graded (FG) shell with a power law distribution for volume fraction is considered, where its properties vary gradually through the shell thickness direction from pure me...
متن کاملElastic Buckling Analysis of Ring and Stringer-stiffened Cylindrical Shells under General Pressure and Axial Compression via the Ritz Method
Elastic stability of ring and stringer-stiffened cylindrical shells under axial, internal and external pressures is studied using Ritz method. The stiffeners are rings, stringers and their different arrangements at the inner and outer surfaces of the shell. Critical buckling loads are obtained using Ritz method. It has been found that the cylindrical shells with outside rings are more stable th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Naval Architecture and Ocean Engineering
سال: 2018
ISSN: 2092-6782
DOI: 10.1016/j.ijnaoe.2017.12.002