EXPERIMENTAL MODAL ANALYSIS OF PASSENGER CAR ENGINE OIL PAN USING FEM AND FFT ANALYZER
نویسندگان
چکیده
منابع مشابه
Experimental and FEM Modal Analysis of a Deployable-Retractable Wing
The aim of this paper is to conduct experimental modal analysis and numerical simulation to verify the structural characteristics of a deployable-retractable wing for aircraft and spacecraft. A modal impact test was conducted in order to determine the free vibration characteristics. Natural frequencies and vibration mode shapes were obtained via measurement in LMS Test. Lab. The frequency respo...
متن کاملStatic and modal analysis of parabolic-boundary functionalized Carbon nanotube-reinforced composite plates using FEM
This paper investigates the effect of different methods of carbon nanotubes distribution in a thin matrix on static and dynamic behavior of the nanocomposite. Five different symmetric patterns of distribution are considered, including four parabolic patterns and a linear one. For each pattern, the effective mechanical properties of the resultant nanocomposite are calculated using the rule of mi...
متن کاملStatic and modal analysis of parabolic-boundary functionalized Carbon nanotube-reinforced composite plates using FEM
This paper investigates the effect of different methods of carbon nanotubes distribution in a thin matrix on static and dynamic behavior of the nanocomposite. Five different symmetric patterns of distribution are considered, including four parabolic patterns and a linear one. For each pattern, the effective mechanical properties of the resultant nanocomposite are calculated using the rule of mi...
متن کاملFinite element analysis of fatigue damage in passenger-car diesel engine cylinder head under cyclic thermo-mechanical loadings
In this article, the thermo-mechanical fatigue lifetime of the cylinder head of a passenger-car diesel engine has been estimated. At the first stage, stress and strain distributions in the cylinder head have been calculated using the two-layer visco-plastic model, available in the ABAQUS software. The calibration of the model was performed, using correlating of simulated hysteresis curves and l...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Research in Engineering and Technology
سال: 2017
ISSN: 2321-7308,2319-1163
DOI: 10.15623/ijret.2017.0603001