Experimental Study of A 6063 Aluminium Alloy Two Phase Closed Thermosyphon Charged with Tio2 Nanofluid
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Boiling and Condensation Heat Transfer of a two Phase Closed Thermosyphon
In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of the thermosyphon. The experimental boiling and condensation heat transfer coefficients inside the thermosyphon were com...
متن کاملExperimental Investigation of Boiling and Condensation Heat Transfer of a Two Phase Closed Thermosyphon
In this paper the heat transfer characteristics of a two-phase closed thermosyphon over a wide range of heat transfer rates, system pressure, aspect ratios and filling ratios were studied. The experiments focused on the boiling and condensation heat transfer characteristics of a thermosyphon with a copper tube having 25 and 32 mm inside and outside diameters. Distilled water was used as the wor...
متن کاملTwo-phase Closed Thermosyphon with Nanofluids
Nanofluids, stabilized suspensions of nanoparticles typically < 100 nm in conventional fluids, are evolving as potential enhanced heat transfer fluids due to their better thermal conductivity, increase in single phase heat transfer coefficient and significant increase in critical boiling heat flux. In the present paper, we investigate the overall thermal resistance of a closed two-phase thermos...
متن کاملThe effect of magnetic field and nanofluid on thermal performance of two-phase closed thermosyphon (TPCT)
The efficiency of two-phase closed thermosyphon (TPCT) with nanofluid as working fluid under magnetic field effect was investigated experimentally. In this study, silver/water nanofluid with different concentration (20 to 80ppm) is tested. Also, magnetic field with various strength (0.12, 0.35 and 1.2 T) exerted to TPCT by permanent magnet. It was seen that the TPCT heat transfer performance an...
متن کاملStudies of Corrosion of Aluminium and 6063 Aluminium Alloy in Phosphoric Acid Medium
The corrosion behaviour of aluminium and6063 aluminium alloy was investigated in phosphoric acid of different concentrations at different temperatures. The study was done by electrochemical method, using Tafel polarization and electrochemical impedance spectroscopy (EIS) techniques. The kinetic parameters and thermodynamic parameters were calculated using Arrhenius theory and transition state t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Mechanical Engineering
سال: 2019
ISSN: 2348-8360
DOI: 10.14445/23488360/ijme-v6i7p102