Experimental study of critical heat flux in a narrow vertical rectangular channel. Comparison between uniform heat flux case and nonuniform heat flux case.
نویسندگان
چکیده
منابع مشابه
Experimental Study on the Effect of Magnetic Field on Critical Heat Flux of Ferrofluid Flow Boiling in a Vertical Tube
In the present work, the critical heat flux measurements were performed for the subcooled flow boiling of pure water and magnetic nanofluids (i.e., water + 0.01 and 0.1 vol.% Fe3O4) in a vertical tube. The effect of applying an external magnetic field on the CHF variation was studied experimentally as well. The obtained results indicated that the subcooled flow boiling CHF in the vertical tub...
متن کاملExperimental Study for Investigating the Mechanism of Heat Transfer near the Critical Heat Flux in Nucleate Pool Boiling
Heat transfer coefficient in nucleate pool boiling near critical heat flux at least one orderhigher than the convectional heat transfer modes. In this paper, an experimental setup isdesigned and fabricated to investigate the mechanism of heat transfer from boiling surface tobulk liquid near critical heat flux. The images of pool boiling near the high heat flux regionreveals that the individual ...
متن کاملCritical heat flux in thin, uniform particle coatings
Pool boiling on thin, uniform porous coatings is examined experimentally using different copper particle diameters (between 40 and 80 lm), fabrications (loosely packed, shaken, or pressed), and particle characteristics (solid or porous particle) with coating thickness varying between 3 and 5 particle diameters. The results show that the critical heat flux (CHF) is about 1.8 times for all the co...
متن کاملCuO/water Nanofluid Convective Heat Transfer Through Square Duct Under Uniform Heat Flux
Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...
متن کاملExperimental and numerical study of heat flux distribution in laser forming of bi-layer sheets
Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B
سال: 1989
ISSN: 0387-5016,1884-8346
DOI: 10.1299/kikaib.55.2809