Experimental Study of Glass Fiber Reinforced Concrete Incorporating Micro Silica
نویسندگان
چکیده
The most common building material utilized worldwide is concrete. Concrete with higher compressive strength becoming more and in demand as the trend toward using it widely for high rise buildings. Experimental study of glass fiber (GF) reinforced concrete incorporating micro silica was investigated this study. prepared by M40 mix. GF 12 mm length aspect ratio 857 used. Four volume fractions 0%, 0.4%, 0.8% 1.2% weight cement 5% are distributed randomly all directions. mixes were cast tested workability, strength, flexural water permeability test, drop Impact bond test residual at elevated temperature. Micro structural done SEM analysis. Workability decreased increase GF. Compressive show 12% increment whereas Flexure increases 35% compare to normal Different percentages fibres have lower penetration depths. With regard fire resistance temperature decreases significantly. content. Hence, it's suggested use according
منابع مشابه
Experimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)
The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...
متن کاملExperimental Investigation of Behavior of Glass Fiber Reinforced Concrete (GFRC)
The paper presents the results of casting and testing of 264 GFRC specimens. The glass fibers were 25 mm long, with the aspect ratio (L/D) ranging between 1250 and 3570. The parameters studied were the ratio (by weight) of fibers to cement, i.e. F/C=0%, 1.5%, 3%, and 4.5%, and the ratio of coarse to fine aggregates (gravel to sand), i.e. G/S=1.1, 0.7 and 0.2. In total, 12 mix designs were selec...
متن کاملExperimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature
This study investigated the effects of high temperature exposure on the compressive, tensile, and flexural strengths of concrete containing glass fiber. A total of 108 cubic specimens (150 mm × 150 mm × 150 mm), cylindrical specimens (300 mm × 150 mm), and prismatic specimens (500 mm × 150 mm × 150 mm) were prepared for compressive, tensile, and flexural strength testing, respectively. The spec...
متن کاملComparative Study of Steel and Glass Fiber Reinforced Concrete Composites
Concrete is most widely used construction material in the world. Fiber reinforced concrete (FRC) is a concrete in which small and discontinuous fibers are dispersed uniformly. The fibers used in FRC may be of different materials like steel, G.I., carbon, glass, aramid, asbestos, polypropylene, jute etc. The addition of these fibers into concrete mass can dramatically increase the compressive st...
متن کاملDurable Glass Fiber Reinforced Concrete with Supplimentary Cementitious Materials
Durability of concrete structure in marine environments is a big issue for many decades due to chloride attack. Chloride penetrates the concrete structure and accelerates the corrosion process of reinforcement which decreases the life of those structures. Also shrinkage cracks in concrete play main role for chloride penetration through concrete surface. Many researchers tried to find easy and ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Scientific Research and Reports
سال: 2023
ISSN: ['2320-0227']
DOI: https://doi.org/10.9734/jsrr/2023/v29i71763