Experimental Study of Square and Rectangular CFDST Sections with Stainless Steel Outer Tubes under Axial Compression
نویسندگان
چکیده
منابع مشابه
buckling of functionally graded beams with rectangular and annular sections subjected to axial compression
the current study presents a new analytical method for buckling analysis of rectangular and annular beams made up of functionally graded materials with constant thickness and poisson’s ratio. the boundary conditions of the beam are assumed to be simply supported and clamped. the stability equations were obtained by using conservation of energy. the critical buckling load and first mode shape we...
متن کاملExperimental and Numerical Study on Bar-Reinforced Concrete Filled Steel Tubular Columns Under Axial Compression
The behaviors of bar-reinforced concrete filled steel tubular columns subjected to axial load were studied. One plain concrete filled steel tubular column and three bar-reinforced concrete filled steel tubular columns were tested. The deformation of specimens and the strain of steel tubes were measured. Based on experimental researches, a simple numerical analysis method was presented to simula...
متن کاملenergy absorption by thin-walled tubes with various thicknesses in rectangular and square sections under different quasi-static conditions: experimental and numerical studies
impact is one of the most important subjects which always have been considered in mechanical science. nature of impact is such that which makes its control a hard task. therefore it is required to adopt a safe and secure mechanism for transferring the impact to other vulnerable parts of a structure, when it is necessary. one of the best methods of absorbing impact energy is using thin-walled tu...
متن کاملExperimental Study on Double-Walled Copper and Carbon/Epoxy Composite Tubes under the Axial Loading
This paper investigates axial compression process of multi-layered tubes with circular cross-section under the axial loading in the quasi-static condition using experimental method. Some specimens are prepared in seven different groups, namely; empty carbon/epoxy composite tubes, solid carbon/epoxy composite rods, empty copper tubes, composite tubes with silicon sealant filler, concentrically s...
متن کاملNumerical and Experimental Study on Ratcheting Behavior of Steel Cylindrical Shells with/without Cutout Under Cyclic Combined and Axial Loading
Ratcheting behavior of steel 304L cylindrical shell under cyclic combined and axial loading are investigated in this paper, numerically. Cylindrical shells were fixed oblique at angle of 20° and normal with respect to the longitudinal direction of the shell and subjected to force-controlled cycling with non-zero mean force, which causes the accumulation of plastic deformation or ratcheting beha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural Engineering
سال: 2019
ISSN: 0733-9445,1943-541X
DOI: 10.1061/(asce)st.1943-541x.0002408