Experimental study on a spray and falling-film cooling system
نویسندگان
چکیده
منابع مشابه
a study on construction of iranian life tables: the case study of modified brass logit system
چکیده ندارد.
15 صفحه اولExperimental Investigation into the Hydrodynamics Effects of Slot Film Cooling on a Cylindrical Model
An experimental study of hydrodynamics of film cooling is performed by using a single longitudinal slot on a cylindrical model simulated to the leading edge of the gas turbine blade. The model is set up into the test section of an open-circuit induced flow wind tunnel which provides the main flow. The injected air, as a secondary film flow, produced from a high pressure compressor is considered...
متن کاملTheoretical and experimental study of the effects of spray inclination on two-phase spray cooling and critical heat flux
Experiments were conducted with PF-5052 liquid sprays impacting a 1.0 1.0 cm heated test surface at different inclination angles, flow rates, and subcoolings. Inclination angle had no noticeable effect on the single-phase or two-phase regions of the boiling curve. Maximum CHF was always achieved with the spray impinging normal to the test surface; increasing angle of inclination away from the n...
متن کاملWave Evolution on a Falling Film
Since the pioneering experiment by the father-son team of the Kapitza family during their house arrest in the late forties (Kapitza & Kapitza 1949), wave evolution on a falling film has intrigued many researchers. One of its main attractions is its simplicity-it is an open-flow hydrodynamic instability that occurs at very low flow rates. It can hence be studied with the simplest experimental ap...
متن کاملNumerical and experimental study of spray cooling of a heated metal surface
The spraying of an impinging jet is an effective way to cool heated surfaces. The objective of this study is to develop a numerical model to predict the heat transfer with phase change between a hot plate surface and a two-phase impinging jet. Different two-phase modeling approaches (Lagrangian and Eulerian methods) are compared. The influence of the spray nozzle operating conditions (pressure,...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Case Studies in Thermal Engineering
سال: 2021
ISSN: 2214-157X
DOI: 10.1016/j.csite.2021.101057