Experimental study on measurement of aspheric surface shape with complementary annular subaperture interferometric method
نویسندگان
چکیده
منابع مشابه
Aspheric Surface Measurement Using Capacitive Sensors
This paper proposes a new method for the measurement of spherical coordinates by using capacitive sensors as a non-contact probe solution of measurement of aspheric surfaces. The measurement of the average effect of the capacitive probe and the influence of capacitive probe tilting were studied with respect to an eccentric spherical surface. Based on the tested characteristic curve of the avera...
متن کاملOptoacoustic imaging based on the interferometric measurement of surface displacement.
We present images of tissue phantoms and chicken chorio-allantoic membrane vasculature using a novel optoacoustic tomography technique based on the time-resolved interferometric measurement of laser-induced thermoelastic expansion. Our imaging system is based on a modified Mach-Zehnder interferometer that provides surface displacement measurements with a temporal resolution of 4 ns and a displa...
متن کاملApplications of computer-generated holograms for interferometric measurement of large aspheric optics
Interferometric optical testing using computer-generated holograms (CGH’s) has proven to give highly accurate measurements of aspheric surfaces. New applications of CGH interferometry were developed to support the fabrication of the large, steep mirrors required by the next generation ground-based telescopes. A new test to certify null correctors was designed and implemented that uses small CGH...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2007
ISSN: 1094-4087
DOI: 10.1364/oe.15.012890