Experimental validation of numerical static calculations for a monolithic rectangular tank with walls of trapezoidal cross-section

numerical simulation and experimental validation of free surface sloshing in a rectangular tank

free surface sloshing of liquid in a rectangular tank induced by lateral excitation has been studied numericallyand experimentally in this paper. the numerical simulation is carried out based on the volume of fluid (vof) method that provides free surface extraction in such problem. a tank with transparent walls is used to free surface tracking in experimental study while the movement amplitude ...

Numerical Simulation of Turbulent Jets with Rectangular Cross-section*

Three-dimensional turbulent jets with rectangular cross-section are simulated with a finite-difference numerical method. The full Navier-Stokes equations are solved at low Reynolds numbers, whereas at the high Reynolds numbers filtered forms of the equations are solved along with a subgrid scale model to approximate effects of the unresolved scales. A 2-N storage, third-order Runge-Kutta scheme...

Experimental Investigation of Mixing in a rectangular cross-section Micromixer

validation of a revised logical-mathematical intelligence scale and exploring its relationship with english language proficiency

نظریه هوش چندگانه قسمتهای متفاوت هوش بشری را مورد بررسی قرار می دهد که با شناخت آن شخص به درک بهتری از توانایی های خود میرسد و در نتیجه سعی در استفاده از آن جهت یادگیری بهتر میکند. همچنین با شناخت استعداد دانش آموزان، فرایند یادگیری بهتر میشود. هدف از انجام دادن این تحقیق بررسی رابطه بین هوش ریاضی و استعداد یادگیری زبان انگلیسی میباشد. برای انجام این تحقیق از پرسشنامه هوش ریاضی که توسط شیرر در ...

Numerical and Experimental Study of Buckling of Rectangular Steel Plates with a Cutout

Steel plates are used in various structures, such as the structures of the deck and body of ships, bridges, and aerospace industry. In this study, we investigate the buckling and post-buckling behavior of rectangular steel plates having circular cutouts with two boundary conditions: first, clamped supports at upper and lower ends and free supports at other edges; second, clamped supports at upp...