Experimental Verification of Design Procedure for Elements from Cross-laminated Timber

Ambient vibration tests of a cross-laminated timber building

Computer-aided Design and Construction of Glued Laminated Timber Structure

The paper presents the computer-aided design and construction of a large glued laminated timber structure in Aosta, Italy. The structure was completely computer modelled with in-house developed software, which considers both torsion and curvature constraints of timber. Further proprietary software was used to develop, on a plane, the shape of each timber layer without torsion and curvature . Th...

Development of limit states design (LRFE) methods for stress laminated timber “cellular” bridge decks

The focus of this research is the stress laminated timber cellular deck. The testing program has involved application of loads that modelled both the design serviceability and design ultimate conditions, and identified slip and load redistribution mechanisms, which occur at the limit state of linear composite behaviour. This paper presents a summary of the results of this testing and discusses ...

Cross Laminated Timber Construction for Resisting Lateral Loads on Six Level Buildings

The author’s intention is to contribute to the general discussion on timber multi-level commercial buildings. Interest in this topic is expected due to the environmental advantages of timber construction when compared to concrete and steel. This paper looks into three timber based systems for resisting lateral loads for buildings to six storeys, that will ensure relatively ‘open’ floor spaces. ...

Robust Anti-Windup Control Design for PID Controllers–Theory and Experimental Verification

This paper addresses an approximation-based anti-windup (AW) control strategy for suppressing the windup effect caused by actuator saturation nonlinearity in proportional–integral–derivative (PID) controlled systems. The effect of actuator constraint is firstly regarded as a disturbance imported to the PID controller. The external disturbance can then be modeled by a linear differential equatio...