External Gas-Assisted Mold Temperature Control Improves Weld Line Quality in the Injection Molding Process
نویسندگان
چکیده
منابع مشابه
Study on the Mold Temperature Control for the Core Plate during Injection Molding Process
Abstract: During injection molding process, the mold temperature is one of the most important influences on the product quality. In this paper, the temperature of the core plate with the size of 100 mm × 100 m × 40 mm will be examined for different product sizes. Different types of heating and cooling channels are inserted in the core plate. The size of the plastic product will be changed from ...
متن کاملPrecision Injection Molding PRECISION PROCESS CONTROL OF INJECTION MOLDING
1 INTRODUCTION The technical requirements of precision injection molded components demand a heightened level of process performance, and with corresponding process monitoring and control technologies. To obtain the desired critical to quality attributes (CTQs) of the molded products, the injection molding process must be consciously designed such that the key process variables (KPVs) are observ...
متن کاملOn-line Quality Control of Injection Molding Using Neural Networks
Plastics is one of the world’s largest and fastest growing industries, ranked as one of the few multi-billion dollar industries. Due to the vast improvements in polymers and production processes, plastics are now amongst the world’s most widely used materials, with the world consumption of polymers surpassing steel in volume and weight. Injection molding represents approximately 32% (by weight)...
متن کاملAnalysis of the Three Dimensional Mold-filling Process in Injection Molding
For the three decades, the mold-filling of injection molding process was modeled as Hele-Shaw model. However, this model can not consider the 3D effect. In this paper, numerical simulations of three dimensional mold-filling during the filling phase were performed. The governing equations were discretized by segregated finite element method, which used equal order interpolation for pressure and ...
متن کاملSimulation of Stress Distribution near Weld Line in the Viscoelastic Melt Mold Filling Process
Simulations of interface evolution and stress distribution near weld line in the viscoelastic melt mold filling process are achieved according to the viscoelastic-Newtonian two-phase model. The finite volume methods on nonstaggered grids are used to solve the model. The level set method is used to capture the melt interface. The interface evolution of the viscoelastic melt in the mold filling p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma13122855