Extraction Kinetics of Uranium(VI) with Polyurethane Foam.
نویسندگان
چکیده
منابع مشابه
Anisotropic polyurethane foam
Anisotropic polymer foams have been prepared, which exhibit a Poisson's ratio exceeding 1, and ratios of longitudinal to transverse stiffness exceeding 50. The foams are as much as 20 times stiffer in the longitudinal direction than the foams from which they were derived. The transformation process involved applying a uniaxial stress sufficient to produce 25% to 45% axial strain to open-cell po...
متن کاملQuantitative separation of zinc traces from cadmium matrices by solid-phase extraction with polyurethane foam.
A system for separation of zinc traces from large amounts of cadmium is proposed in this paper. It is based on the solid-phase extraction of the zinc in the form of thiocyanate complexes by the polyurethane foam. The following parameters were studied: effect of pH and of the thiocyanate concentration on the zinc extraction, shaking time required for quantitative extraction, amount of PU foam ne...
متن کاملNonlinear Optical Properties of Rigid Polyurethane Foam/SiO2 Nanocomposite
Polyurethane closed cell (PUCC)/SiO2 nanocomposites have been prepared by using in situ polymerization approach. The third-order optical nonlinearities of PUCC/SiO2 nanocomposites, dissolved in DMF are characterized by Z-scan technique at the measurement wavelength of 532 nm. The nonlinear refractive (NLR) indices and nonlinear absorption (NLA) coefficients of samples were calculated from close...
متن کاملCharacterization of Hot Bituminous-Asphalt Mixtures with Recycled Polyurethane Foam
Received: June 06, 2017 Revised: July 05, 2017 Accepted: July 19, 2017 Abstract: Introduction: The use of polymer wastes in pavement as road is an increasing trend in the road construction sector. Those new pavements reduce the amount of solid waste disposed into landfills and provide more sustainable construction due to the use of in-situ materials. Polyurethane foam waste is a thermostable po...
متن کاملModeling of Compression Curves of Flexible Polyurethane Foam with Variable Density, Chemical Formulations and Strain Rates
Flexible Polyurethane (PU) foam samples with different densities and chemical formulations were tested in quasi-static stress-strain compression tests. The compression tests were performed using the Lloyd LR5K Plus instrument at fixed compression strain rate of 0.033 s-1 and samples were compressed up to 70% compression strains. All foam samples were tested in the foam rise direction and their ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF CHEMICAL ENGINEERING OF JAPAN
سال: 1993
ISSN: 0021-9592,1881-1299
DOI: 10.1252/jcej.26.361