Extrusion process of aluminium
نویسندگان
چکیده
منابع مشابه
Method for Pocket Die Design on the Basis of Numerical Investigations of Aluminium Extrusion Process
A typical extrusion of low and medium strength aluminium alloys solid shapes is performed with flat pocket dies. The pocket allows realising the extrusion as “billet-to-billet” process, and also facilitates filling-up die channel deadlocks and thin-walled elements of profile [1]. In addition it serves as an instrument for shape geometry control. The scientific literature contains a variety of r...
متن کاملOptimal Process Control Parameters Estimation in Aluminium Extrusion for Given Product Characteristics
This paper investigates a technique to find an optimal set of conditions for an isothermal process to extrude a product for a given shape and material properties with minimal defects. The inputs to this model are: the product geometry and its material data such as flow curve and microstructure during dynamic recrystallization. This is an inverse problem and the model is formulated as a non-line...
متن کاملModelling of friction for high temperature extrusion of aluminium alloys
During high-temperature ball-on-disc tests of aluminium against steel, hot aluminium deformsand wear track evolves. The individual contributions of ploughing and shearing to theapparent friction and the contact pressure are unknown. The aim of this chapter was todevelop a model capable of determining these parameters. It was found that during high-temperature ball-on-disc tests,...
متن کاملPredicting Extrusion Process Parameters Using Neural Networks
The objective of this paper is to estimate realistic principal extrusion process parameters by means of artificial neural network. Conventionally, finite element analysis is used to derive process parameters. However, the finite element analysis of the extrusion model does not consider the manufacturing process constraints in its modeling. Therefore, the process parameters obtained through such...
متن کاملExtrusion process control: modeling, identification, and optimization
Our work has been focused on developing a methodology for process control of bulk deformation—specifically, extrusion. A process model is required for control. We state the difficulties which exist with currently available models. An appropriate decomposition and associated assumptions are introduced which permit a real-time process model to be constructed via spectral approximation to solve th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 1968
ISSN: 0451-5994
DOI: 10.2464/jilm.18.593