Fabrication and characterization of silver nanorods incorporated calcium silicate scaffold using polymeric sponge replica technique
نویسندگان
چکیده
منابع مشابه
Fabrication and nanostructural characterization of TiO2 nanorods
TiO2 nanorods are synthesized by a thermal corrosion. In present work, synthesis of TiO2 nanorods in anatase, rutile and Ti8O15 phases, by using the sol-gel method and alkaline corrosion are reported. The morphologies and crystal structures of TiO2 nanorods are characterized by use of field emission scanning electron microscopy, atomic force microscopy and X-ray diffractometer techniques. The o...
متن کاملFabrication of hydroxyapatite-baghdadite nanocomposite scaffolds coated by PCL/Bioglass with polyurethane polymeric sponge technique
Objecttive (s): Silicate bioceramics like Baghdadite with chemical formula Ca3ZrSi2O9, has attracted the attention of researchers in biomedical field due to its remarkable in-vitro and in-vivo bioactivity and mechanical properties.Materials and Methods: Therefore, in the current study the baghdadite powder with Sol-Gel method was synthesized. Then, hydroxyapatite/Baghdadite (HA/Bagh) scaffolds ...
متن کاملFabrication of polymeric nanorods using bilayer nanoimprint lithography.
Polymeric nanoparticles are becoming increasingly important in a variety of biological applications, such as biomolecular sensing, diagnostic imaging, and therapeutic drug delivery. For these applications, the mass production of multifunctional nanocomposite materials with precise control of particle size, shape, and composition is a significant challenge. For instance, the use of conventional ...
متن کاملfabrication and nanostructural characterization of tio2 nanorods
tio2 nanorods are synthesized by a thermal corrosion. in present work, synthesis of tio2 nanorods in anatase, rutile and ti8o15 phases, by using the sol-gel method and alkaline corrosion are reported. the morphologies and crystal structures of tio2 nanorods are characterized by use of field emission scanning electron microscopy, atomic force microscopy and x-ray diffractometer techniques. the o...
متن کاملFabrication and characterization of the Ti-6Al-4V/Mg scaffold
Ti–6Al–4V scaffolds were fabricated by powder metallurgical space holder technique in this research. The most added magnesium (Mg) powder was evaporated and a skeleton of Ti-6Al-4V alloy was produced. For this purpose Ti-6Al-4V and Mg powders mixture compacted in a steel die by applying uniaxial pressure of 500 MPa before sintering the green product in a sealed quartz tubes at 900 °C for 2 hour...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials & Design
سال: 2020
ISSN: 0264-1275
DOI: 10.1016/j.matdes.2020.109026