Fabrication and Experimental Study on Two-Axis Solar Tracking
نویسندگان
چکیده
منابع مشابه
Fabrication of Dual-Axis Solar Tracking Controller Project
The recent decades have seen the increase in demand for reliable and clean form of electricity derived from renewable energy sources. One such example is solar power. The challenge remains to maximize the capture of the rays from the sun for conversion into electricity. This paper presents fabrication and installation of a solar panel mount with a dual-axis solar tracking controller. This is do...
متن کاملTwo-axis solar tracking accomplished through small lateral translations.
High-concentration solar-power optics require precise two-axis tracking. The planar micro-optic solar concentrator uses a lenslet array over a planar waveguide with small reflective facets at the focal point of each lenslet to couple incident light into the waveguide. The concentrator can use conventional tracking, tilting the entire assembly, but the system geometry also allows tracking by sma...
متن کاملDual Axis Solar Tracking System
For a senior design project, we have created a solar tracking system . The key requirements for this system were to create an effective and low cost system in order to optimise efficiency of solar panel . The developed solution is a prototype that might be built upon to create a production model. The motivation, solution (including design, implementation, and testing), and analysis of the resul...
متن کاملPotential of One-Axis and Two-Axis Tracking Photovoltaic Systems
This paper explores the potential of solar energy generation in the area of The Hashemite University in Jordan (32.05_N, 36.06_E) by investigating the optimal inclination and azimuth angles of photovoltaic (PV) modules for every hour, day, month, and of the whole year. The object of this study is to maximize the annual energy production of PV systems by tracking the changes of sun's position in...
متن کاملDesign and fabrication of two-axis micromachined steel scanners
This paper presents the fabrication and the test results of two-axis micromachined micro-mirror steel scanners developed for display and imaging applications. The novel fabrication method uses the conventional lithography and electrochemical metal etching techniques. A single photomask is used to define the whole structure, resulting in a simple and inexpensive fabrication process. Two differen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Applied Research in Mechanical Engineering
سال: 2011
ISSN: 2231-5950
DOI: 10.47893/ijarme.2011.1023