Fabrication and fibre matrix interface characteristics of Cu/C(Fe) composite
نویسندگان
چکیده
منابع مشابه
Fabrication and Mechanical Properties of Iron Slag Matrix Composite Materials
–The objective of present work is to use this industrial waste i.e. Slag as particulate filler material to the epoxy matrix composites by molding technique with different weight fractions ( 0%, 5%,10%,15%, 20% ) to study the mechanical behaviour of reinforced polymer composite material. The change in weight is studied for Slag under different tests like, tensile, bending and impact for obtainin...
متن کاملFabrication of TiC particulate reinforced Ni-50Fe super alloy matrix composite powder by mechanical alloying
Mechanical alloying is a powder metallurgy processing technique involving cold welding, fracturing, and rewelding of powder particles in a high-energy ball mill. In this work, NiFe-TiC composite powders were prepared by mechanical alloying process using planetary high-energy ball mill. The effect of TiC addition by weight percent on the NiFe solid solution formation, grain size, lattice paramet...
متن کاملA shear-lag model with a cohesive fibre–matrix interface for analysis of fibre pull-out
A shear-lag model with a cohesive fibre–matrix interface has been developed for the analysis of stress transfer between the fibre and the matrix in fibre-reinforced composites in this paper. A bilinear cohesive damage evolution law is used to describe the fibre–matrix interface behaviour. The governing equations for the interfacial shear stress and the axial stress in the fibre are derived. Acc...
متن کاملInorganic Polymer Matrix Composite Strength Related to Interface Condition
Resin transfer molding of an inorganic polymer binder was successfully demonstrated in the preparation of ceramic fiber reinforced engine exhaust valves. Unfortunately, in the preliminary processing trials, the resulting composite valves were too brittle for in-engine evaluation. To address this limited toughness, the effectiveness of a modified fiber-matrix interface is investigated through th...
متن کاملInterface Properties in a Porous-Matrix Oxide Composite
This study focuses on the interfacial properties of a family of porous matrix oxide composites with uncoated fibers. Measurements of debond energy and sliding stress are made using a modified version of the established fiber push-in test. Modifications include the following: (i) use of a sphero-conical indenter (not a sharp-tipped one) to produce only elastic deformation of the fibers, and (ii)...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Science of Sintering
سال: 2009
ISSN: 0350-820X,1820-7413
DOI: 10.2298/sos0902193l