Fabrication and mechanical characterization of YAG ceramic-composite with alumina nanoparticles using slip casting and sintering process
نویسندگان
چکیده
منابع مشابه
Fabrication of high–strength alumina composite foams through gel–casting process
A water–soluble gelatin combined with polyethylene microspheres were developed to prepare alumina composite foam. Gelatin was used as the gelling agent and polyethylene was used as pore making template. On the other hand, kaolin was used to provide green strength and CuO was applied to decrease the required temperature as a sinter aid. Alumina bodies need elevate temperature for sintering, incr...
متن کاملThe effect of slip casting parameters on the ultrafine microstructure and density of pore-free YAG ceramic obtained by vacuum sintering
In this study, the effect of slip casting parameters on the ultrafine microstructure and the density of pore-free YAG ceramic was evaluated. A stable, high concentrated aqueous YAG slurry using Dolapix-CE64 as a dispersant was prepared. The effect of dispersant concentration as well as the solid load on the stability and rheological behavior of the slurry was also studied. The optimal dispersan...
متن کاملfabrication of high–strength alumina composite foams through gel–casting process
a water–soluble gelatin combined with polyethylene microspheres were developed to prepare alumina composite foam. gelatin was used as the gelling agent and polyethylene was used as pore making template. on the other hand, kaolin was used to provide green strength and cuo was applied to decrease the required temperature as a sinter aid. alumina bodies need elevate temperature for sintering, incr...
متن کاملSintering Process and Mechanical Property of MWCNTs/HDPE Bulk Composite
Studies have proved that increasing polymer matrices by carbon nanotubes to form structural reinforcement and electrical conductivity have significantly improved mechanical and electrical properties at very low carbon nanotubes loading. In other words, increasing polymer matrices by carbon nanotubes to form structural reinforcement can reduce friction coefficient and enhance anti-wear property....
متن کاملSintering properties of zirconia-based ceramic composite
This study examines the effects of different ZrB2 content on various mechanical properties and electrical conductivity of ZrB2/Y-TZP composite. Composites with ZrB2 content of up to 20 wt-% were particularly beneficial at the lower sintering temperature range by achieving greater densification and better hardness than Y-TZP monolith. In contrast to the trends estimated from rule of mixture, the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Express
سال: 2020
ISSN: 2053-1591
DOI: 10.1088/2053-1591/abca6b