Fabrication and properties of Si2N2O ceramics for microwave sintering furnace
نویسندگان
چکیده
منابع مشابه
Microwave Sintering of Thermistor Ceramics
Microwave sintering is a new sintering technology developed in the middle to late period of the 1980’s, which is characterized by fast densification for ceramic materials[1]. In recent years, microwave heating has been well employed in the field of sintering and joining of ceramics as a result of its advantages against conventional methods. These ceramic materials include oxides, mixed oxides, ...
متن کاملEffect of Calcination Kinetics and Microwave Sintering Parameters on Dielectric and Peizo-Electric Properties of(K0.5Na0.5) NBO3 Ceramics
An efficient solid-state approach was established to synthesize (K0.5Na0.5) NbO3 ceramics using calcination kinetics and microwave assisted sintering. Milling of carbonate and oxide raw materials were carried out for 15h to obtain homogeneous nano particles. The crystallite size of 5.30 nm was obtained for the KNN system after calcination through optimized parameters and observed to be stoichio...
متن کاملMicrowave Sintering of Ceramics for Dentistry: Part 2
Each tooth was then placed upon the reticulated zirconia in the thermal containment box and the technique of Microwave Hybrid Heating (MHH) was applied. The temperature measurements were taken every two minutes. We attempted to sinter the teeth in the microwave furnace with both fast and gradual heating rate (per minute) by manipulating the power rate. The power was increased gradually for few ...
متن کاملUltra High Temperature Microwave Sintering – Furnace and Process Design
Scale up of microwave sintering for high temperature stable non-oxide ceramics, such as SiC, Si3N4, and dispersion ceramics, like SiC-MoSi2 is still difficult, mainly because of lack of an affordable equipment. For air atmosphere sintering different furnaces were developed, like e.g., gas-microwave hybrid heated tunnel kilns [1] or microwave sintering using an adiabatic casket in tunnel kilns [...
متن کاملLOW-TEMPERATURE SINTERING AND MICROWAVE DIELECTRIC PROPERTIES OF (Zn0.65Mg0.35)TiO3-CaTiO3 CERAMICS WITH H3BO3 ADDITION
Low-melting H3BO3, acting as sintering aid, was used to reduce the sintering temperature of 5 wt.% CaTiO3-doped (Zn0.65Mg0.35)TiO3 ceramics. The sintering behaviors, microstructures and microwave dielectric properties with different amounts of H3BO3 addition were investigated. The results showed that H3BO3 additive was very effective for lowering the sintering temperature and improving the bulk...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Processing and Application of Ceramics
سال: 2020
ISSN: 1820-6131,2406-1034
DOI: 10.2298/pac2001032f