Fabrication of a Pneumatic Microparticle Concentrator
نویسندگان
چکیده
منابع مشابه
Design and Fabrication of Pneumatic Robotic Arm
This project aims to Design and fabricate pneumatic arm for pick and place of cylindrical objects. The handling of materials and mechanisms to pick and place of objects from lower plane to higher plane and are widely found in factories and industrial manufacturing. There are number of pneumatic arms are available which consists of so many mechanisms hence becomes expensive. The designed pneumat...
متن کاملPneumatic splints: fabrication and use in neurorehabilitation.
Asymmetrical tone and weakness in antagonistic muscles often result in misalignment of joint, contractures and deformities. Traditional static splints used to prevent these complications are expensive, have to be custom made and cannot be used when deformities are marked. Authors describe fabrication and use of pneumatic splints, which are economic, safe and easy to apply. These splints have wi...
متن کاملOptical Design of a Novel 2-stage Solar Trough Concentrator Based on Pneumatic Polymeric Structures
An innovative concept for fabricating solar trough concentrators based on pneumatic polymer mirrors supported on precast concrete frames is presented. Optical aberration is corrected by means of a secondary specular reflector in tandem with the primary cylindrical concentrator. The optimal design is formulated for maximum solar flux concentration. The Monte Carlo ray-tracing technique is applie...
متن کاملFabrication of Pneumatic Microvalve for Tall Microchannel Using Inclined Lithography
We used inclined lithography to fabricate a pneumatic microvalve for tall microchannels such as those used to convey large cells. The pneumatic microvalve consists of three layers. The upper layer is the actual liquid microchannel, which has a parallelogram-shaped cross section of width 500 μm, height 100 μm, and an acute angle of 53.6◦. The lower layer is a pneumatic microchannel that function...
متن کاملDesign and Fabrication of a Novel Hybrid-Structure Heat Pipe for a Concentrator Photovoltaic
This study presents a design method to fabricate a novel hybrid-structure flat plate heat pipe (NHSP heat pipe) for a concentrator photovoltaic. The NHSP heat pipe is composed of a flattened copper pipe and a sintered wick structure, and a coronary-stent-like rhombic copper mesh supports the structure. The coronary-stent-like supporting structure enhances the mechanical strength and shortens th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Micromachines
سال: 2019
ISSN: 2072-666X
DOI: 10.3390/mi11010040