Fabrication of an electrolyte-supported protonic ceramic fuel cell with nano-sized powders of Ni-composite anode
نویسندگان
چکیده
منابع مشابه
Preparation of Ni-ysz Nano-fiber Composite as Fuel Cell Anode Material
A novel route to fabricate nano-fiber anode material for solid oxide fuel cells (SOFCs) is presented. Firstly, uniform nano-fibers of 8 mol % Yttria Stabilized Zirconia (8YSZ) were formed in an electrospinning process; then, these electrospun fibers were calcined at temperatures up to 1300 °C; and finally the ceramic 8YSZ nano-fibers were coated with nickel in an electroless plating process. Th...
متن کاملAGGLOMERATION ASSESMENT OF NANO-SIZED ALUMINA POWDERS
Abstract: Nanoparticles exhibit a high reactivity and strong tendency towards agglomeration. In this study, aluminum oxide (alumina) nanoparticles were characterized by gas adsorption (BET), transmition electron microscopy (TEM) and photon correlation spectroscopy (PCS) techniques to assess the agglomeration of the particles. There is a good correlation between the BET and TEM measurements b...
متن کاملOperation of Ni-YSZ Anode Supported Solid Oxide Fuel Cell on Different Simulated Syngases
Ni-YSZ anode supported solid oxide fuel cells (ASCs) were tested under various simulated syngas. There was no voltage degradation of the cell operated on 41%H2-7%CH4-6%CO-11%CO2-35%H2O fuel condition for nearly 450 hours. However, the high vapor content reduced the open circuit voltage (OCV) and discharge voltage. The cells run steadily with most dry syngas until the simulated reforming tempera...
متن کاملThermal Plasma Synthesis of Nano-sized Powders
Thermal plasmas, normally generated by DC (direct current) arc or inductively coupled RF (Radio Frequency) discharge, can be described as a high enthalpy flame with extremely high temperature fields (1,000~20,000 K) and a wide range of velocity fields from several m/s [1-5] to supersonic values [6-7]. Since the resultant huge enthalpy can be realized for various kinds of plasma forming gases an...
متن کاملProbing novel triple phase conducting composite cathode for high performance protonic ceramic fuel cells
A key obstacle to practical operation of protonic ceramic fuel cells (PCFCs) is the development of high efficient cathode materials. In this study, we report the identification of Gd0.1Ce0.9O2-d (GDC) infiltrated PrBaCo2O5þd (PBC) e BaZr0.1Ce0.7Y0.2O3-d (BZCY) materials as a novel triple phase (e /Hþ/O2 ) conducting composite cathode of PCFCs. This triple phase conducting composite cathode is c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Hydrogen Energy
سال: 2021
ISSN: 0360-3199
DOI: 10.1016/j.ijhydene.2020.09.172