Fabrication of CFRP/Al Active Laminates
نویسندگان
چکیده
منابع مشابه
Multi-material Freeform Fabrication of Active Systems
Current Solid Freeform Fabrication (SFF) technologies can manufacture, directly from digital data, end-use mechanical parts in an increasingly wide variety of engineering materials. However, commercial SFF systems remain costly, complex, proprietary, and are limited to working with one or two proprietary materials during the course of building a part, hindering their broader application and the...
متن کاملA low cost approach for the fabrication of microwave phase shifter on laminates
This paper presents a simple and low cost fabrication approach using extended printed circuit board processing techniques for an electrostatically actuated phase shifter on a common microwave laminate. This approach uses 15 lm thin copper foils for realizing the bridge structures as well as for a spacer. A polymeric thin film deposited by spin coating and patterned using lithographic process is...
متن کاملFabrication and Characterization of Visible Light active Fe-TiO2 Nanocomposites as Nanophotocatalyst
In this research Fe-TiO2 nanocomposites with different molar ratios of Fe/Ti were prepared as nano-photocatalyst using a modified Sol-Gel process at ambient temperature. Crystallographic properties of nanocomposites were characterized by X-ray Diffraction (XRD). Surface morphology and mean particle size of nanocomposites were specified by Field Emission Scann...
متن کاملSimulation of Damage on Laminates
In this paper, we present a recently developed progressive damage model for composites (CPDM) that allows the switching between different damage modes during the numerical process to mimic real physical behaviour. The modelled damage modes are ranging from matrix cracking to fibre breakage or delamination. Moreover, the CPDM is flexible in the sense that provides the basic structure to include ...
متن کاملGuided wave propagation in composite laminates using piezoelectric wafer active sensors
Piezoelectric wafer active sensors (PWAS) are lightweight and inexpensive transducers that enable a large class of structural health monitoring (SHM) applications such as: (a) embedded guided wave ultrasonics, i.e., pitch-catch, pulse-echo, phased arrays; (b) high-frequency modal sensing, i.e., electro-mechanical impedance method; and (c) passive detection. The focus of this paper is on the cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME International Journal Series A
سال: 2003
ISSN: 1344-7912,1347-5363
DOI: 10.1299/jsmea.46.478