Fabrication of dye-sensitized solar cells with multilayer photoanodes of hydrothermally grown TiO2 nanocrystals and P25 TiO2 nanoparticles
نویسندگان
چکیده
منابع مشابه
Nanoparticles influence on dye-sensitized solar cells based on TiO2
Today, Solar cell technology is in limited use due to the relatively high manufacturing cost of silicon based technology, And the low power efficiency of organic polymer based technology. However, Research is being done on hybrid cells based on dye-sensitizing organic polymers and a thin transparent conducting oxide layer comprised of nanoparticles. These cells could offer the same ease of manu...
متن کاملFlexible Dye-Sensitized Nanocrystalline TiO2 Solar Cells
The Dye-sensitized nanocrystaline TiO2 solar cell (nc-DSC) developed by Grätzel [1] has the potential to reach low costs in future outdoor power applications. In addition, due to its expected ease of production and possibilities to adjust its appearance, the potential for application is very broad. When plastic foil is used as a substrate for the nc-DSC the production and application possibilit...
متن کاملOptical modeling-assisted characterization of dye-sensitized solar cells using TiO2 nanotube arrays as photoanodes
Photovoltaic characteristics of dye-sensitized solar cells (DSSCs) using TiO2 nanotube (TNT) arrays as photoanodes were investigated. The TNT arrays were 3.3, 11.5, and 20.6 μm long with the pore diameters of 50, 78.6, and 98.7 nm, respectively. The longest TNT array of 20.6 μm in length showed enhanced photovoltaic performances of 3.87% with significantly increased photocurrent density of 8.26...
متن کاملMorphology-controllable 1D-3D nanostructured TiO2 bilayer photoanodes for dye-sensitized solar cells.
Morphology-controlled bilayer TiO(2) nanostructures consisting of one-dimensional (1D) nanowire bottom arrays and a three-dimensional (3D) dendritic microsphere top layer were synthesized via a one-step hydrothermal method. These novel 1D-3D bilayer photoanodes demonstrated the highest energy conversion efficiency of 7.2% for rutile TiO(2) dye-sensitized solar cells to date, with TiCl(4) post-t...
متن کاملAnatase TiO2 with nanopores for dye-sensitized solar cells.
In this paper, a series of mesoporous anatase TiO2 crystals were prepared through a hydrothermal method. By using different carboxylic acids as solvents and additives, the morphology of the integral crystals as well as inner pores can be tuned by the chain length of the carboxylic acids. Further application of these anatase TiO2 crystals as the photoanode of DSCs resulted in an overall energy c...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bulletin of Materials Science
سال: 2016
ISSN: 0250-4707,0973-7669
DOI: 10.1007/s12034-016-1289-5