Fabrication of fiber-reinforced celsian matrix composites
نویسندگان
چکیده
منابع مشابه
Fabrication and Testing of Natural Fiber Reinforced Hybrid Composites
Work has been carried out to investigate the flexural properties of composites made by reinforcing banana and pineapple as the new natural fibers into epoxy resin matrix. The natural fibers were extracted by retting and manual process. The composites are fabricated using banana and pineapple fiber reinforcements. Hybrid composites were prepared using banana/pineapple fibers of 0/40, 15/25, 20/2...
متن کاملFabrication of in situ TiC reinforced aluminum matrix composites
In the present work, the room and elevated temperature mechanical behavior of Al/TiC, high-strength Al-Si/TiC and the elevated temperature-resistant Al-Fe(-V-Si)/TiC composites has been evaluated. The microstructural characteristics of ingot metallurgy (IM) or rapid solidification (RS) Al-Si/TiC and Al-Fe(-V-Si)/TiC composites could be thought of as a combination of the related alloy matrix mic...
متن کاملFabrication of in-situ grown graphene reinforced Cu matrix composites
Graphene/Cu composites were fabricated through a graphene in-situ grown approach, which involved ball-milling of Cu powders with PMMA as solid carbon source, in-situ growth of graphene on flaky Cu powders and vacuum hot-press sintering. SEM and TEM characterization results indicated that graphene in-situ grown on Cu powders guaranteed a homogeneous dispersion and a good combination between grap...
متن کاملMatrix cracking of fiber-reinforced ceramic composites in shear
The mechanics of cracking in fiber-reinforced ceramic matrix composites (CMCs) under general loadings remains incomplete. The present paper addresses one outstanding aspect of this problem: the development of matrix cracks in unidirectional plies under shear loading. To this end, we develop a model based on potential energy differences upstream and downstream of a fully bridged steady-state mat...
متن کاملBioactive Glass Fiber-Reinforced PGS Matrix Composites for Cartilage Regeneration
Poly(glycerol sebacate) (PGS) is an elastomeric polymer which is attracting increasing interest for biomedical applications, including cartilage regeneration. However, its limited mechanical properties and possible negative effects of its degradation byproducts restrict PGS for in vivo application. In this study, a novel PGS-bioactive glass fiber (F18)-reinforced composite was developed and cha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Part A: Applied Science and Manufacturing
سال: 2001
ISSN: 1359-835X
DOI: 10.1016/s1359-835x(00)00169-x