Fabrication of holographic gratings using a moving point source
نویسندگان
چکیده
منابع مشابه
A novel tunable diode laser using volume holographic gratings
We have developed a self-aligned external cavity laser with a non-dispersive volume holographic grating (VHG) as the output coupler. The resulting external cavity is tunable by rotating the VHG. We have demonstrated tunable single mode longitudinal operation at 405 nm and 785 nm wavelength. The passive alignment of the novel tunable laser is the main driver for achieving low cost manufacturing....
متن کاملA 6-beam Combiner Using Superimposed Volume Index Holographic Gratings
A 6-beam Combiner Using Superimposed Volume Index Holographic Gratings. (August 2004) Ho Nam Yum, B.S., Yonsei University; Chair of Advisory Committee: Dr. Philip Hemmer In this thesis, a 6-beam combiner using multiplexed holograms in dye-doped polymer is investigated. It is realized by recording six superimposed holographic gratings, which show uniform diffraction efficiency. The coupled wave ...
متن کاملCharacterization of PDLC Holographic Gratings
We have studied the optical properties of electrically switched holographic gratings fabricated using polymer-dispersed liquid crystal (PDLC) materials. We have found that the PDLC mixture can be used to control the diffractive properties of the composite gratings, including the anisotropy of the grating. 2000 Optical Society of America OCIS codes: (050.0050) Diffraction and gratings, (050.733...
متن کاملTransient Three-Dimensional Thermal Analysis of a Slab with internal heat generation and heated by a Point Moving Heat Source
In this work, analysis of transient three-dimensional heat transfer in a slab with internal heat generation and heated by a point moving heat source along its axis is carried out using integral transforms methods. The heat input into slab or workpiece by the moving heat source is considered in the model. From the results, it was established that the temperature of the material during the heat t...
متن کاملFabrication of sawtooth diffraction gratings using nanoimprint lithography
We report a process which integrates interference lithography, nanoimprint lithography, and anisotropic etching to fabricate replicated diffraction gratings with sawtooth profiles. This new process greatly reduces grating fabrication time and cost, while preserving the groove shape and smoothness. Relief gratings with 400 nm period inverted triangular profiles and 200 nm period gratings with 7°...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Optics
سال: 1989
ISSN: 0003-6935,1539-4522
DOI: 10.1364/ao.28.003494