Fabrication of ion-trap electrodes by self-terminated electrochemical etching
نویسندگان
چکیده
منابع مشابه
Fabrication of Arbitrarily Shaped Microelectrodes by Electrochemical Etching
Some conventional machining methods have been developed to machine microelectrodes. However, these methods still require too much time and too many resources. This paper uses electrochemical etching as an alternative method for the simple and cheap fabrication of microelectrodes. Electrochemical etching is usually considered an appropriate method of producing sharp probes. However, it is possib...
متن کاملFabrication of uniform 4H-SiC mesopores by pulsed electrochemical etching
In this letter, the uniform 4H silicon carbide (SiC) mesopores was fabricated by pulsed electrochemical etching method. The length of the mesopores is about 19 μm with a diameter of about 19 nm. The introduction of pause time (T off) is crucial to form the uniform 4H-SiC mesopores. The pore diameter will not change if etching goes with T off. The hole concentration decreasing at the pore tips d...
متن کاملSelf-terminating electrochemical etching of stainless steel for the fabrication of micro-mirrors
A novel, self-terminating electrochemical etch process is proposed for the fabrication of scanning steel micro-mirrors. The process uses single mask photolithography, and the etching step is terminated automatically, which at the same time enables the depth profile shaping of the fabricated structure. The proposed process is characterized and then used to fabricate two versions of one-dimension...
متن کاملFabrication of GaN-based Photonic Crystal Structures by Reactive Ion Etching 87 Fabrication of GaN-based Photonic Crystal Structures by Reactive Ion Etching
The fabrication of the 2D GaN-based photonic crystal structure at optical scales, a subμm scale in our case is very challenging. In our work, a double-etching method proved to be feasible to achieve the periodic GaN/air variation. The pattern was defined in a PMMA resist by electron-beam lithography and transferred to SiO2 by reactive ion etching (RIE) in a CF4 plasma and further into GaN by RI...
متن کاملFabrication of p-Type Nano-porous Silicon Prepared by Electrochemical Etching Technique in HF-Ethanol and HF-Ethanol-H2O Solutions
Nano-porous silicon were simply prepared from p-type single crystalline silicon wafer by electrochemical etching technique via exerting constant current density in two different HF-Ethanol and HF-Ethanol-H2O solutions. The mesoporous silicon layers were characterized by field emission scanning electron microscopy and scanning electron microscopy. The results demonstrate that the width of nano-p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: EPJ Techniques and Instrumentation
سال: 2016
ISSN: 2195-7045
DOI: 10.1140/epjti/s40485-016-0030-5